TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size 16 AWG 14 AWG Wire Size, Blue
- RS-artikelnummer:
- 221-6077
- Tillv. art.nr:
- B-106-1402
- Tillverkare / varumärke:
- TE Connectivity
Antal (1 låda med 25 enheter)*
441,60 kr
(exkl. moms)
552,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Sista RS lager
- Slutlig(a) 1 enhet(er), redo att levereras från en annan plats
Låda(or) | Per Låda | Per enhet* |
|---|---|---|
| 1 + | 441,60 kr | 17,664 kr |
*vägledande pris
- RS-artikelnummer:
- 221-6077
- Tillv. art.nr:
- B-106-1402
- Tillverkare / varumärke:
- TE Connectivity
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | TE Connectivity | |
| Series | DuraSeal | |
| Product Type | Ring Terminal | |
| Insulation | Insulated | |
| Insulation Material | Nylon | |
| Inner Ring Diameter | 4.3mm | |
| Outer Ring Diameter | 8mm | |
| Minimum Wire Size AWG | 16 AWG | |
| Maximum Wire Size AWG | 14 AWG | |
| Overall Length | 33.02mm | |
| Stud Size | M4 | |
| Colour | Blue | |
| Contact Material | Copper | |
| Contact Plating | Tin | |
| Standards/Approvals | No | |
| Maximum Operating Temperature | 125°C | |
| Minimum Operating Temperature | -55°C | |
| Välj alla | ||
|---|---|---|
Brand TE Connectivity | ||
Series DuraSeal | ||
Product Type Ring Terminal | ||
Insulation Insulated | ||
Insulation Material Nylon | ||
Inner Ring Diameter 4.3mm | ||
Outer Ring Diameter 8mm | ||
Minimum Wire Size AWG 16 AWG | ||
Maximum Wire Size AWG 14 AWG | ||
Overall Length 33.02mm | ||
Stud Size M4 | ||
Colour Blue | ||
Contact Material Copper | ||
Contact Plating Tin | ||
Standards/Approvals No | ||
Maximum Operating Temperature 125°C | ||
Minimum Operating Temperature -55°C | ||
- COO (Country of Origin):
- MX
Waterproof Duraseal terminals
Crimp terminals pre-installed in a heat shrinkable sleeve coated with a hot melt adhesive to make them waterproof.
The connection, insulation and waterproofing are carried out through shrinking after crimping.
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².
Approvals
UL Listed
relaterade länkar
- TE Connectivity M4 Stud Size Blue
- TE Connectivity 6mm Stud Size Blue
- TE Connectivity M4 Stud Size Red
- RS PRO Insulated Ring Terminal 1.5mm² to 2.5mm² Wire Size, Blue
- TE Connectivity DuraSeal Series Insulated Tin Plated Crimp Ring Terminal 1.5mm² to 2.5mm², 16AWG
- RS PRO Insulated Crimp Ring Terminal 1.5mm² to 2.5mm² Wire Size, Blue
- RS PRO Uninsulated Ring Terminal 1.5mm² to 2.5mm² Wire Size
- Phoenix Contact C-FCI 2.5/M4 Insulated Crimp Spade Connector M4 Stud Size, Blue
