Infineon RF Receiver, 28-Pin PG-TSSOP-28
- RS-artikelnummer:
- 258-4048P
- Tillv. art.nr:
- TDA5240XUMA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal 10 enheter (levereras på en kontinuerlig remsa)*
648,50 kr
(exkl. moms)
810,60 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 2 989 enhet(er) från den 02 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 - 24 | 64,85 kr |
| 25 - 49 | 62,16 kr |
| 50 - 99 | 59,25 kr |
| 100 + | 55,22 kr |
*vägledande pris
- RS-artikelnummer:
- 258-4048P
- Tillv. art.nr:
- TDA5240XUMA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | RF Receiver | |
| Modulation Technique | ASK, FSK | |
| Package Type | PG-TSSOP-28 | |
| Pin Count | 28 | |
| Mount Type | Surface | |
| Interface Type | SPI | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 105°C | |
| Height | 1.2mm | |
| Series | SmartLEWIS RX | |
| Standards/Approvals | RoHS | |
| Length | 9.7mm | |
| Width | 6.4 mm | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type RF Receiver | ||
Modulation Technique ASK, FSK | ||
Package Type PG-TSSOP-28 | ||
Pin Count 28 | ||
Mount Type Surface | ||
Interface Type SPI | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 105°C | ||
Height 1.2mm | ||
Series SmartLEWIS RX | ||
Standards/Approvals RoHS | ||
Length 9.7mm | ||
Width 6.4 mm | ||
Automotive Standard AEC-Q100 | ||
The Infineon SmartLEWIS RX+ IC is a low power ASK/FSK Receiver for the frequency bands 300-320, 425-450, 863-870 and 902-928 MHz. Bi-phase modulation schemes, like Manchester, bi-phase mark, bi-phase space and differential Manchester are supported. The chip offers best-in-class sensitivity performance at a very high level of integration and needs only a few external components. The device is qualified to automotive quality standards and operates between -40 and +105°C at supply voltage ranges of 3.0-3.6 Volts or 4.5-5.5 Volts. The receiver is realized as a double down conversion super-heterodyne/low-IF architecture each with image rejection supplemented by digital signal processing in the baseband.
Separate outputs for recovered data and clock
RSSI peak detectors
Wake-up generator and polling timer unit
Message ID scanning
Unique 32-bit serial number
On-chip temperature sensor
Integrated timer usable for external watch unit
Integrated 4-wire SPI interface bus