Huco Reducing Bush 253.15, 3mm Shaft Diameter, 6.35mm Outside Diameter
- RS-artikelnummer:
- 689-114
- Tillv. art.nr:
- 253.15
- Tillverkare / varumärke:
- Huco
116 I lager för avsändande samma dag
Lagt till varukorgen
Pris (ex. moms) Var (i ett paket med 2)
58,48 kr
(exkl. moms)
73,10 kr
(inkl. moms)
| Enheter | Per unit | Per Pack* |
| 2 - 8 | 58,48 kr | 116,96 kr |
| 10 - 18 | 56,335 kr | 112,67 kr |
| 20 - 48 | 55,005 kr | 110,01 kr |
| 50 + | 53,785 kr | 107,57 kr |
- RS-artikelnummer:
- 689-114
- Tillv. art.nr:
- 253.15
- Tillverkare / varumärke:
- Huco
Datablad
Lagstiftning och ursprungsland
- COO (Country of Origin):
- GB
Produktdetaljer
Bore reducers
These bore reducers are designed for use with universal joints, nickel bellows seals and shaft couplings.
They allow the bore diameter to be adjusted, increasing the range of diameters available.
When fitted to hubs with a stop screw, the reducers act as an annular flange, so no marks are left on the shaft.
Shafts can be removed or repositioned repeatedly without touching the reducers, which remain in the hubs.
They allow the bore diameter to be adjusted, increasing the range of diameters available.
When fitted to hubs with a stop screw, the reducers act as an annular flange, so no marks are left on the shaft.
Shafts can be removed or repositioned repeatedly without touching the reducers, which remain in the hubs.
Note
D: Hub diameter
B1: Shaft diameter
L: Length
B1: Shaft diameter
L: Length
Specifikationer
Attribute | Value |
|---|---|
| Shaft Diameter | 3mm |
| Outside Diameter | 6.35mm |
| Length | 6.6mm |
| Material | Brass |
| Minimum Operating Temperature | -20°C |
| Maximum Operating Temperature | +60°C |