RF Solutions RADIOPi Modem Dongle for Raspberry Pi
- RS-artikelnummer:
- 793-4418
- Tillv. art.nr:
- ZULU-DONGLE
- Tillverkare / varumärke:
- RF Solutions
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
- RS-artikelnummer:
- 793-4418
- Tillv. art.nr:
- ZULU-DONGLE
- Tillverkare / varumärke:
- RF Solutions
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | RF Solutions | |
| Product Name | RADIOPi Modem Dongle for Raspberry Pi | |
| Accessory Category | Communication | |
| Form Factor | Addon | |
| Välj alla | ||
|---|---|---|
Brand RF Solutions | ||
Product Name RADIOPi Modem Dongle for Raspberry Pi | ||
Accessory Category Communication | ||
Form Factor Addon | ||
- COO (Country of Origin):
- GB
RADIOPi Modem Dongle for Raspberry Pi
The RADIOPi wireless dongle is an easy to use plug and play RF Modem link and it will transmit directly to the BLIZZARD Radio Modem 793-4391 and ZULU Radio Module types such as 761-9869.
Operation Modes:
One-to-One: point to point serial cable replacement
Broadcast Mode: single master sending to many slaves on the same address
One-to-Many: single master sending to many slaves on indvidual addresses
Many-to-One: many transmitters sending to a single slave
Operation Modes:
One-to-One: point to point serial cable replacement
Broadcast Mode: single master sending to many slaves on the same address
One-to-Many: single master sending to many slaves on indvidual addresses
Many-to-One: many transmitters sending to a single slave
Operating frequency range: 868 to 870MHz ISM/SRD-band with 5 channels
RF Output Power: up to +20dBm
Receiver Sensitivity: -116dBm
Data Rate: up to 56kbps
Range: up to 1000m
Powered from USB socket
SMA antenna connector
Operating temperature range: -40 to +85°C
Applications: Remote networking, M2M communications, USB cable replacement and local communication for the Internet-of-Things (IoT)
RF Output Power: up to +20dBm
Receiver Sensitivity: -116dBm
Data Rate: up to 56kbps
Range: up to 1000m
Powered from USB socket
SMA antenna connector
Operating temperature range: -40 to +85°C
Applications: Remote networking, M2M communications, USB cable replacement and local communication for the Internet-of-Things (IoT)
Note
Factory default settings: Rx / Tx addresses: 7F7F7F, Carrier: 869.45MHz (Channel 2), Tx Power: +20dBm, Data Rate: 19.2kbps
Approvals
ETSI
Supplied with
Antenna with SMA connector
Wireless Modules - RF Solutions
relaterade länkar
- Raspberry Pi Raspberry Pi HATs & Add-ons
- RF Solutions, ZULU Radio Modem
- Raspberry Pi Digital TV HAT
- Raspberry Pi Official Case Fan for Raspberry Pi 4
- Raspberry Pi Sense HAT with LED Matrix & Environmental Sensors for Raspberry Pi
- Raspberry Pi Debug Probe
- Raspberry Pi PoE + board
- Infineon TLE94112ES HAT for Raspberry Pi
