Seeed Studio Real Time Clock (RTC) with DS1307 and Battery Backup for Raspberry Pi
- RS-artikelnummer:
- 184-5104
- Distrelec artikelnummer:
- 301-27-507
- Tillv. art.nr:
- 103030277
- Tillverkare / varumärke:
- Seeed Studio
Antal (1 enhet)*
65,32 kr
(exkl. moms)
81,65 kr
(inkl. moms)
Lagerinformation är för närvarande otillgänglig
Enheter | Per enhet |
|---|---|
| 1 + | 65,32 kr |
*vägledande pris
- RS-artikelnummer:
- 184-5104
- Distrelec artikelnummer:
- 301-27-507
- Tillv. art.nr:
- 103030277
- Tillverkare / varumärke:
- Seeed Studio
Specifikationer
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Seeed Studio | |
| Product Name | Real Time Clock (RTC) with DS1307 and Battery Backup for Raspberry Pi | |
| Accessory Category | Clock/Timer | |
| Form Factor | Addon | |
| Välj alla | ||
|---|---|---|
Brand Seeed Studio | ||
Product Name Real Time Clock (RTC) with DS1307 and Battery Backup for Raspberry Pi | ||
Accessory Category Clock/Timer | ||
Form Factor Addon | ||
- COO (Country of Origin):
- CN
The Pi RTC is based on the clock chip DS1307, it can provide a real-time clock(RTC) for raspberry pi via the I2C interface. Real-time clock of this module counts seconds,minutes, hours, date of the month,month, day of the week, and year with leap-year compensation valid up to 2100. The clock operates in either the 24-hour or 12-hour format with AM/PM indicator. If you want to keep this module timing when the Raspberry Pi is powered off, you need to put a 3-Volt CR1225 lithium cell in the battery-holder.
Support Raspberry Pi 2/ 3 B/B+ Zero
Support seconds,minutes,hours,day of week,month, year
Support 24-hour or 12-hour format with AM/PM indicator
56-byte, battery-backed, non-volatile (NV) RAM for data storage
Programmable square wave output signal
Automatic power-fail detect and switch circuitry
Applications
Applications need Real Time on Raspberry.
Support seconds,minutes,hours,day of week,month, year
Support 24-hour or 12-hour format with AM/PM indicator
56-byte, battery-backed, non-volatile (NV) RAM for data storage
Programmable square wave output signal
Automatic power-fail detect and switch circuitry
Applications
Applications need Real Time on Raspberry.
relaterade länkar
- Seeed Studio 101020013, RTC Development Kit for DS1307
- Seeed Studio RS485 Addon Board For Raspberry Pi
- Seeed Studio Aluminium Heatsink Cooling Kit for Raspberry Pi
- Seeed Studio ReSpeaker Quad Microphone HAT for Raspberry Pi
- Seeed Studio ReSpeaker Dual Microphone HAT for Raspberry Pi
- Seeed Studio 4 Piece Heatsink Cooling Kit for Raspberry Pi 4B
- Seeed Studio GrovePi+ Starter Kit 12 Grove Sensors for Raspberry Pi
- Seeed Studio GrovePi+ Bridge with 15 Grove Module Connectors for Raspberry Pi
