Raspberry Pi, Plastic Case for use with Raspberry Pi 2B, Raspberry Pi 3B, Raspberry Pi 3B+ in Red, White

  • RS-artikelnummer 103-4299
  • Tillv. art.nr TZT 241 AAA-01
  • Tillverkare / varumärke Raspberry Pi
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): GB
Produktdetaljer

Official Case for Raspberry Raspberry Pi 3 B

From Raspberry Pi the official Raspberry Pi 3 case designed to enclose and protect your Raspberry Pi 3 Model B development board. This Raspberry Pi 3 case is both stylish and lightweight and made from high quality moulded plastic. The RPi case has a modular construction consisting of 5 pieces which easily snap together without the need for any tooling or screws. The modular design of this Pi 3 Model B case means allow the sides and top to be removed allowing quick access to internal GPIO connections and interfaces

Raspberry Pi 3 Model B Case Components

Two Part Case Body

The main body of this Raspberry Pi 3 case consists of a top half and bottom half that snap together to form a protective covering for the RPi and other sensitive electronic components. The Raspberry Pi 3 enclosure features cut outs for micro-SD, USB and Ethernet ports. Apertures or light tunnels in the sides of the enclosure allow status LEDs to be visible through the case. Pegs incorporated into the base of the case are designed to fit the holes on the RPi board for accurate alignment. The top of the Raspberry Pi case features a large cut-out allowing room for accessory cables. Anti-slip stick on feet are provided to secure the base of the Pi case firmly to a surface.

2 x Sides and Lid

The sides and lid of this modular Raspberry Pi case are both easily removable providing design flexibility and allowing easy access to internal connections such as GPIO pins. The sides incorporate cut-outs for all the main connector ports. The lid provides protection to the internal components and its sleek, polished design provides an attractive appearance. The official Raspberry Pi case can also be used without the lid which allows space when using HAT (Hardware Attached on Top) boards as well as offering extra ventilation.

Key Features and Benefits

• Suitable for use with Raspberry Pi 3 Model B development board
• Easy to assemble snap together modular design
• Compact, stylish and lightweight
• Apertures for visibility of status LEDs though the case
• Removable sides and lid for easy access to GPIO pins and interfaces
• Pegs in base for alignment of Raspberry Pi 3 board
• Cut-outs for primary ports including micro-SD port
• Large cut out in top cover for accessory cables
• Anti-slip stick on feet for secure mounting
• Available in a choice of eye catching colours

Note

This Official Raspberry Pi case is designed for the Raspberry Pi 3 Model B, but it will also protect your Raspberry Pi B+ or Raspberry Pi 2 if you can accept blocking the LED light pipes.

Raspberry Pi development board is not included

Specifikationer
Attribute Value
For Use With Raspberry Pi 2B, Raspberry Pi 3B, Raspberry Pi 3B+
Colour Red, White
Series Official
External Dimensions 97 x 70 x 25mm
Body Material Plastic
9472 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Box of 256)
60,226 kr
(exkl. moms)
75,282 kr
(inkl. moms)
Enheter
Per unit
Per Box*
256 +
60,226 kr
15 417,856 kr
Related Products
Molded in a general purpose ABS plastic with ...
Description:
Molded in a general purpose ABS plastic with a satin texture. Enclosure designed to allow access to I/O connectors & often used controls and/or LEDSModels are adaptable to a wide selection of ArduinosEnclosure is secured with self tapping screws.Includes four ...
From Italtronic the DIN (EN 60715) Modulbox Arduino ...
Description:
From Italtronic the DIN (EN 60715) Modulbox Arduino case designed to enclose and protect your Arduino YUN development board. This DIN rail mount Arduino enclosure is designed according to DIN 43880 in order to meet the requirements of a range ...
The RPI-BC enclosure from Phoenix Contact is designed ...
Description:
The RPI-BC enclosure from Phoenix Contact is designed to house a Raspberry Pi model A+, B+, B2 or B3. It features tool-free mounting and complies with DIN 43880 enabling it to be integrated in a distributor housing. The RPI-BC housing ...
Enclosure is compatible with Pi 3 B+ and ...
Description:
Enclosure is compatible with Pi 3 B+ and HAT’s including the Sense HATRemovable clear coverPi clips into enclosure without screwsRear LED light-pipesKnockouts for GPIO and Sense Hat joystickCut-outs for USB and ethernetRear cut-out for SD card accessSide cut-outs for HDMI, ...