STMicroelectronics LNBH26LSPQR Dual LNBS Supply and Control IC 500 mA, 440 kHz, Adjustable, 19.82 V, 24-Pin, QFN

Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

PWM Controllers, STMicroelectronics

Pulse-width modulator (PWM) controllers can support isolated and non-isolated AC-DC and DC-DC switch mode power supplies. They are based on the most popular topologies in both single-ended, such as fly-back, forward or quasi-resonant controllers, and double-ended configurations, such as asymmetrical half-bridge, for Switch Mode Power Supplies (SMPS).
The PMW controllers also integrate a comprehensive set of protections for enhanced robustness and reliability.

PWM (Pulse Width Modulation) Controllers, STMicroelectronics

Specifikationer
Attribute Value
PWM Controller Type Step Up
Minimum Input Voltage 8 V
Maximum Input Voltage 16 V
Output Voltage 19.82 V
Output Current 500 mA
Line Regulation 40 mV
Load Regulation 100 mV
Mounting Type Surface Mount
Package Type QFN
Pin Count 24
Maximum Switching Frequency 440 kHz
Output Type Adjustable
Length 4.1mm
Height 0.95mm
Width 4.1mm
Dimensions 4.1 x 4.1 x 0.95mm
Minimum Operating Temperature -25 °C
Maximum Operating Temperature +125 °C
3605 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each (In a Pack of 5)
6,458 kr
(exkl. moms)
8,072 kr
(inkl. moms)
Enheter
Per unit
Per Pack*
5 +
6,458 kr
32,29 kr
Förpackningsalternativ:
Related Products
The NCP4305 is high performance driver tailored to ...
Description:
The NCP4305 is high performance driver tailored to control a synchronous rectification MOSFET in switch mode power supplies. Thanks to its high performance drivers and versatility, it can be used in various topologies such as DCM or CCM flyback, quasi ...
The MIC28515/14 is a wide input range (4.5V-75V) ...
Description:
The MIC28515/14 is a wide input range (4.5V-75V) integrated FET, 5A switching regulators. The MIC28515/14 is lever aging the latest enhanced high voltage COT controllers co-packaged with a pair of low FOM power trench N-Channel FETS with improved avalanche rating. ...
The MCP39F511 is a highly integrated, single-phase power-monitoring ...
Description:
The MCP39F511 is a highly integrated, single-phase power-monitoring IC designed for real-time measurement of input power for AC/DC power supplies, providing power and energy values. It includes dual-channel delta sigma ADCs, a 16-bit calculation engine, EEPROM and a flexible 2-wire ...
The Microchip MCP102 is a Voltage Supervisor that ...
Description:
The Microchip MCP102 is a Voltage Supervisor that keeps a Microcontroller or other device in Reset during a Brownout event via an active-low Reset Pin. Ultra-Low Supply Current: 1.75 μA (steady-state maximum)Resets Microcontroller in a Power-Loss EventRST Pin: Active-low, push-pullReset ...