Tele Process Pump Controller, 250 V ac, +55°C
- RS-artikelnummer:
- 182-9996
- Tillv. art.nr:
- G2ASMA20
- Tillverkare / varumärke:
- Tele
Antal (1 enhet)*
1 865,83 kr
(exkl. moms)
2 332,29 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 4 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 1 865,83 kr |
*vägledande pris
- RS-artikelnummer:
- 182-9996
- Tillv. art.nr:
- G2ASMA20
- Tillverkare / varumärke:
- Tele
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Tele | |
| Supply Voltage | 250 V ac | |
| IP Rating | IP20, IP40 | |
| Maximum Fluid Temperature | +55°C | |
| Välj alla | ||
|---|---|---|
Brand Tele | ||
Supply Voltage 250 V ac | ||
IP Rating IP20, IP40 | ||
Maximum Fluid Temperature +55°C | ||
- COO (Country of Origin):
- AT
Pump control, Alternating/parallel
Alternated access of two pumps or other devices
Even distribution of duty
Parallel duty at high demand
Operation using 1 or 2 input signals (two modes of operation)
Timing offset of the two loads to avoid water hammer effcects
Supply voltage selectable via TR2 power modules
2 separate change over relays for device control
Width 22.5mm
Industrial design
Task
Two pumps are installed at a sewage pumping station that are to be run alternately for equal periods to ensure equal wear.
Solution
The pump switchover system activates the pumps alternately, if needed, the second pump can also be activated so that both run at the same time (parallel operation)
Use/value
Equal wear, and therefore longer service intervals for both pumps
Minimised pump failures through nearly equal number of operating hours
Peak load coverage
Zero-voltage safety in the event of power failures
Applications
Centrifugal Pumps
Sewage Pumps
Water & Waste
Even distribution of duty
Parallel duty at high demand
Operation using 1 or 2 input signals (two modes of operation)
Timing offset of the two loads to avoid water hammer effcects
Supply voltage selectable via TR2 power modules
2 separate change over relays for device control
Width 22.5mm
Industrial design
Task
Two pumps are installed at a sewage pumping station that are to be run alternately for equal periods to ensure equal wear.
Solution
The pump switchover system activates the pumps alternately, if needed, the second pump can also be activated so that both run at the same time (parallel operation)
Use/value
Equal wear, and therefore longer service intervals for both pumps
Minimised pump failures through nearly equal number of operating hours
Peak load coverage
Zero-voltage safety in the event of power failures
Applications
Centrifugal Pumps
Sewage Pumps
Water & Waste
relaterade länkar
- Sensata Cynergy3 Process Pump Controller +45°C
- Sensata Cynergy3 Process Pump Controller for Hydromatic +60°C
- RS PRO Process Pump Controller for Brushless Micropump +80°C
- Xylem Process Pump Controller for Standard Liquid Pump, 415 V ac
- Xylem Lowara Process Pump Controller for Diaphragm 240 V, +60°C
- RS PRO Process Pump Controller for Brushless Micropump, 6 → 28V
- RS PRO Process Pump Controller for Brushless Micropump, 6 → 28 V dc
- Verderflex Process Pump Spares Kit, Pump Spares Kit for use with M60 Peristaltic Pumps
