Telemecanique Sensors Inductive Threaded Barrel Proximity Sensor, M5, 0.8 mm Detection, NPN NO, 5 → 24 V dc

Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.

Alternativ

Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.

RS-artikelnummer:
221-1640
Tillv. art.nr:
XS1N05NA311S
Tillverkare / varumärke:
Telemecanique Sensors
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Telemecanique Sensors

Thread Size

M5

Sensor Technology

Inductive

Body Style

Threaded Barrel

Detection Range

0.8 mm

Digital Switching Output Type

NPN

Output Function

NO

Connection Type

M8

Supply Voltage

5 → 24 V dc

IP Rating

IP67

Length

41mm

Mounting Type

Flush

Maximum DC Voltage

24V

Minimum Operating Temperature

-25°C

Switching Frequency

100 Hz

Maximum Switching Frequency

100Hz

Series

XS

Switching Current

100 mA

Shielding

Shielded

Maximum Operating Temperature

+70°C

COO (Country of Origin):
FR
The Schneider Electric XS series inductive proximity sensor is solely for the detection of metal objects. It basically comprises an oscillator whose windings constitute the sensing face. An alternating magnetic field is generated in front of these windings. When a metal object is placed within the magnetic field generated by the sensor, the resulting currents induced form an additional load and the oscillations cease. This causes the output driver to operate and, depending on the sensor type, a normally open (NO) or normally closed (NC) output signal is produced.

Body type Fixed
Detector flush mounting
acceptance
Flush mountable
Material Stainless steel
Type of output signal Discrete
Wiring technique 3-wire
[Sn] nominal sensing
distance
0.8 mm
Discrete output function 1 NO
Output circuit type DC
Discrete output type NPN
Electrical connection Male connector M8, 3 pins
[Us] rated supply
voltage
5...24 V DC
Switching capacity in
mA
<= 100 mA with overload and short-circuit protection

relaterade länkar