PL-Q873-02 KEMET, PL, 5000mm 4-Pin Tape & Reel
- RS-artikelnummer:
- 205-5825P
- Tillv. art.nr:
- PL-Q873-02
- Tillverkare / varumärke:
- KEMET
Mängdrabatt möjlig
Antal 10 enheter (levereras på en kontinuerlig remsa)*
620,50 kr
(exkl. moms)
775,60 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 15 juli 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 - 99 | 62,05 kr |
| 100 - 249 | 51,63 kr |
| 250 - 499 | 42,45 kr |
| 500 + | 41,44 kr |
*vägledande pris
- RS-artikelnummer:
- 205-5825P
- Tillv. art.nr:
- PL-Q873-02
- Tillverkare / varumärke:
- KEMET
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | KEMET | |
| Sensor Type | Proximity Sensor | |
| Maximum Output Current | 20µA | |
| Maximum Output Voltage | 0.55 V | |
| Sensing Distance | 5000mm | |
| Package Type | Tape & Reel | |
| Pin Count | 4 | |
| Series | PL | |
| Välj alla | ||
|---|---|---|
Brand KEMET | ||
Sensor Type Proximity Sensor | ||
Maximum Output Current 20µA | ||
Maximum Output Voltage 0.55 V | ||
Sensing Distance 5000mm | ||
Package Type Tape & Reel | ||
Pin Count 4 | ||
Series PL | ||
The Kemet Pyroelectric Infrared Sensors use the pyroelectric effect of ceramic by absorbing infrared rays emitted from the human body. This detects the natural infrared signature produced by humans. Also, it can detect infrared rays without using lenses. Due to the absence of a lens, KEMETs Pyro Sensor is low profile, as it does not protrude, which makes it ideal for gathering visual requirements. With KEMETs proprietary piezoelectric ceramic material and element structure of the Pyroelectric Infrared Sensor, humans can be detected through glass or resin. This allows more freedom in the design of the outer appearance of the end product.
Reflow capable SMD configuration
Lens not required
A lens can be attached to the sensor
Wide view angle up to ±60 degrees (lens less)
View angle up to ±37/±28 degrees (with lens)
Detection possible through glass or resin
Low power consumption, down in the
Lens not required
A lens can be attached to the sensor
Wide view angle up to ±60 degrees (lens less)
View angle up to ±37/±28 degrees (with lens)
Detection possible through glass or resin
Low power consumption, down in the
