Senaste sökningar

    John Drummond MTL10 Voltage Indicator & Proving Unit Kit 3.5mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit

    RS-artikelnummer:
    706-8586
    Tillv. art.nr:
    MTL10/PD
    Tillverkare / varumärke:
    John Drummond
    John Drummond
    Se alla Proving Units
    Denna produkt har utgått

    Alternativ

    Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.

    John Drummond MTL20 Voltage Indicator & Proving Unit Kit 28mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit
    RS-artikelnummer
    706-8589

    Pris (ex. moms) Each

    2 330,95 kr

    (exkl. moms)

    2 913,69 kr

    (inkl. moms)

    RS-artikelnummer:
    706-8586
    Tillv. art.nr:
    MTL10/PD
    Tillverkare / varumärke:
    John Drummond

    Und.t.

    COO (Country of Origin):
    PH

    Lagstiftning och ursprungsland

    Und.t.

    COO (Country of Origin):
    PH

    Produktdetaljer

    Drummond MTL10 Test Lamp and Proving Unit Safety Kit


    Voltage level indicator & proving unit safety kit comprising:


    MTL10 Drummond Test Lamp


    Bright LED indication of voltage between 50V and 500V AC/DC
    Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
    Meets the UK Health and Safety Executive guidance notes on electrician’s test lamp (GS38)
    Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V


    PD440 Proving Unit:


    Essential to check the MTL10 for correct operation prior to working on electrical circuits
    The PD440 is a 440Vac proving unit, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations
    Operating Temperature: -10°C to +40°C at max 70% RH
    Battery: 6 x LR6 / MN1500 1.5V alkaline batteries or equivalent
    Dimensions: 143 x 84 x 50mm
    Weight: 400g approx including battery
    6 AA batteries (required, see stock no. 591-225)


    Supplied with

    Handy carry case, right angled probe tip, two straight tips and instructions


    Mains Voltage Indicators - Contact


    Specifikationer

    AttributeValue
    Test Current Rating3.5mA
    Output Voltage50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc
    Power SourceMains
    Dimensions213 x 112 x 72mm
    Weight320g
    Height72mm
    Length213mm
    Maximum Operating Temperature+55°C
    Minimum Operating Temperature-10°C
    Width112mm
    Denna produkt har utgått

    Alternativ

    Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.

    John Drummond MTL20 Voltage Indicator & Proving Unit Kit 28mA 50 V ac/dc, 100 V ac/dc, 200 V ac/dc, 400 V ac/dc, Kit
    RS-artikelnummer
    706-8589

    Pris (ex. moms) Each

    2 330,95 kr

    (exkl. moms)

    2 913,69 kr

    (inkl. moms)