RS PRO Galvanised BS21 40mm Stainless Steel Pipe, 3.23m Length, 48mm Nominal Outer Diameter
- RS-artikelnummer:
- 796-644
- Tillverkare / varumärke:
- RS PRO
Denna produkt har utgått
- RS-artikelnummer:
- 796-644
- Tillverkare / varumärke:
- RS PRO
Datablad
Lagstiftning och ursprungsland
RoHS-status: Inte relevant
- COO (Country of Origin):
- GB
Produktdetaljer
RS PRO Steel Tubes
Introducing a series of RS PRO general purpose steel tubes that comply fully with BS1387. These medium gauge round steel tubes are suitable for a wide range of applications at low and moderate pressure. Each tube is ready to be cut to create a frame, painted or powder coated.
Where would you use them?
Steel tubes are typically used in manufacturing and material applications. They are high strength, load bearing and easily customised for desired requirements.
Guidance
• Hot bending is generally recommended in preference to cold bending
• Galvanising of cold worked tubes is not advisable unless the tubes have been suitably heat treated after cold working
• Cold expanding of tube ends is not recommended.
• Hot expanding of tube ends should be carried out at a temperature in the range 950 °C to 1050 °C.
• Hot expanding should not be carried out on galvanized tubes.
• Machining operations may be carried out using normal techniques
Where would you use them?
Steel tubes are typically used in manufacturing and material applications. They are high strength, load bearing and easily customised for desired requirements.
Guidance
• Hot bending is generally recommended in preference to cold bending
• Galvanising of cold worked tubes is not advisable unless the tubes have been suitably heat treated after cold working
• Cold expanding of tube ends is not recommended.
• Hot expanding of tube ends should be carried out at a temperature in the range 950 °C to 1050 °C.
• Hot expanding should not be carried out on galvanized tubes.
• Machining operations may be carried out using normal techniques
Features and Benefits
• Suitable for indoor and outdoor
• Very strong
• Ductile and easily formed
• Recyclable
• Compatible with clamps
• Very strong
• Ductile and easily formed
• Recyclable
• Compatible with clamps
RS PRO Steel Tube Options
Steel Round Tube
RS stock no: 285-8980 - Length 1000 mm, Dia. 34.2 mm
RS stock no: 285-9006 - Length 1000 mm, Dia. 42.9 mm
RS stock no: 285-9012 - Length 2000 mm, Dia. 42.9 mm
Galvanised Steel Round Tube
RS stock no: 285-9028 - Length 1000 mm, Dia. 48.8 mm
RS stock no: 285-9034 - Length 2000 mm, Dia. 48.8 mm
RS stock no: 285-8996 - Length 2000 mm, Dia. 34.2 mm
Galvanised Threaded Steel & Stainless Steel Pipe
RS stock no: 698-843 - Length 3.23 m, Nominal Outer Diameter 33.4 mm
RS stock no: 796-638 - Length 3.23 m, Nominal Outer Diameter 42.1 mm
RS stock no: 796-644 - Length 3.23 m, Nominal Outer Diameter 48 mm
Typical Applications
Steel tubing is both strong and durable and can be found in a wide range of applications such as:
• Construction
• Industrial equipment
• Automotive manufacturing
• Plumbing
RS stock no: 285-8980 - Length 1000 mm, Dia. 34.2 mm
RS stock no: 285-9006 - Length 1000 mm, Dia. 42.9 mm
RS stock no: 285-9012 - Length 2000 mm, Dia. 42.9 mm
Galvanised Steel Round Tube
RS stock no: 285-9028 - Length 1000 mm, Dia. 48.8 mm
RS stock no: 285-9034 - Length 2000 mm, Dia. 48.8 mm
RS stock no: 285-8996 - Length 2000 mm, Dia. 34.2 mm
Galvanised Threaded Steel & Stainless Steel Pipe
RS stock no: 698-843 - Length 3.23 m, Nominal Outer Diameter 33.4 mm
RS stock no: 796-638 - Length 3.23 m, Nominal Outer Diameter 42.1 mm
RS stock no: 796-644 - Length 3.23 m, Nominal Outer Diameter 48 mm
Typical Applications
Steel tubing is both strong and durable and can be found in a wide range of applications such as:
• Construction
• Industrial equipment
• Automotive manufacturing
• Plumbing
Note
3.2m lengths have male BSP threaded ends, 1 and 2m lengths are plain.
Standards
BS 1387
Standards
BS1387
Specifikationer
Attribute | Value |
|---|---|
| Finish | Galvanised |
| Nominal Outer Diameter | 48mm |
| Wall Thickness | 3.2mm |
| Length | 3.23m |
| Thread Size | 40mm |
| Thread Standard | BS21 |