Knipex Crimp Die Set, Coaxial Type Crimp Die Black

Se alla Crimping Dies

Antal (1 enhet)*

1 880,48 kr

(exkl. moms)

2 350,60 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • 1 enhet(er) levereras från den 16 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +1 880,48 kr

*vägledande pris

RS-artikelnummer:
305-419
Distrelec artikelnummer:
180-54-621
Tillv. art.nr:
97 49 24
Tillverkare / varumärke:
Knipex
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Knipex

Product Type

Crimp Die Set

Insulation

Insulated

Colour

Black

Number of Ports

3

Sub Type

Crimp Die

For Use With

Universal Crimping Plier - 97 43 200

Standards/Approvals

No

COO (Country of Origin):
DE

Crimping Die Set 97 49 24


Knipex universal crimping die 97 43 200 / RS 336-8084;For D-Sub plugs; HD 20; HDE from 03mm² to 0.56mm² - AWG 32 to 20;Dies are machined and engraved with the cable section

Can be used with the Knipex 97 43 200 / RS 336-8084 universal crimping tool, which offers the following advantages :


Interchangeable crimping dies

One tool for almost 1,000 different crimps

Virtually parallel crimping mechanism

Consistently high crimping quality thanks to precision dies and forced locking mechanism (can be unlocked)

Crimping pressure is precisely set at the factory (calibrated), adjustable

Increased force due to lever transmission for less tiring work

Features and benefits :


Parallel crimping

Precision machining to obtain a precise crimp that meets the manufacturer's technical specifications

Over 1000 interchangeable dies.;Weight: about 40g

Special quality oil-hardened vanadium chrome electric steel

Maintenance tips :


Product maintenance

  • To maintain proper operation and long service life, shafts and other moving parts should be lubricated regularly.

  • Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

  • The setting of the crimping die ranges should also be checked.

  • Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

    • *Use a light non-mineral oil.

    Importance of high quality crimping

    When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the crimping of the insulation, which relieves vibration and stress. It is important that the electrical connection is gas-tight with no voids between the wire strands and the lug. If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete gas tight crimp, preventing future deterioration of the electrical connection and insulation failure.

    Relaterade länkar