Microchip Technology STK600 Routing Card Adapter Board with ATmega8535 - ATSTK600-RC05

  • RS-artikelnummer 130-6930
  • Tillv. art.nr ATSTK600-RC05
  • Tillverkare / varumärke Microchip
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
Produktdetaljer

STK600 Starter Kit Routing Cards

The STK600 starter kit from Atmel has a sandwich design to match a specific part package and pin out to the generic pin headers. It also features an expansion area where most part pins are available. While the variety of IC packages is relatively limited, the number of possible pin outs increases rapidly with the number of pins. i.e. a 6-pin IC can have 720 (6!) different pin outs! The routing / socket card design provides a low cost solution to support upcoming devices as the socket is the cost driving factor. The routing cards sit between the generic socket card and the STK600. It has one pair of electric pads underneath to mate with the STK600 spring loaded connector, and one pair of pads on top where the socket card connector connects. A part specific card with the target IC soldered on can be viewed as a routing card without the top pads.

Routing cards for tinyAVR®, megaAVR®, XMEGA™, AVR® UC3™ and AVR® PWM series in standard package sockets

Specifikationer
Attribute Value
Classification Adapter Board
Kit Name STK600 Routing Card
Device Core AVR
Processor Family Name AVR
Processor Part Number ATmega8535
Processor Type MCU
29 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
126,98 kr
(exkl. moms)
158,72 kr
(inkl. moms)
Enheter
Per unit
1 +
126,98 kr
Related Products
Demonstration boards for the Silicon Labs TS1105 Unidirectional ...
Description:
Demonstration boards for the Silicon Labs TS1105 Unidirectional Current Sense Ampliter with buffered unipolar output and adjustable bias. The TS1105 high-side current-sense amplifier uses 0.68 μA (typical) and buffered output 0.76 μA (typical).Available with two gain options;20 V/V - TS1105-20 ...
The NB6L72 is a high-bandwidth fully differential 2 ...
Description:
The NB6L72 is a high-bandwidth fully differential 2 x 2 clock or data Crosspoint Switch with internal source termination and LVPECL output structure, optimized for low skew and minimal jitter. The differential inputs incorporate internal 50-ohm termination resistors and will ...
The NB3N3020DTG is a high precision, low phase ...
Description:
The NB3N3020DTG is a high precision, low phase noise selectable clock multiplier. The device takes a 5 - 27 MHz fundamental mode parallel resonant crystal or a 2 - 210 MHz LVCMOS single ended clock source and generates a differential ...
The NB7V33M is a differential divide by 4 ...
Description:
The NB7V33M is a differential divide by 4 Clock divider with asynchronous reset. The differential Clock inputs incorporate internal 50-ohm termination resistors and will accept LVPECL, CML and LVDS logic levels. The NB7V33M produces a div 4 output copy of ...