STMicroelectronics Nucleo Pack MCU, Motor Control Development Kit with STM32F302R8 - P-NUCLEO-IHM002

  • RS-artikelnummer 123-1061
  • Tillv. P-NUCLEO-IHM002
  • Tillverkare / varumärke STMicroelectronics
Lagstiftning och ursprungsland

P-NUCLEO-IHM002 BLDC Motor Control Development Kit and Power Supply

The STM32 Nucleo pack P-NUCLEO-IHM002 is a kit composed of the X-NUCLEO-IHM07M1 board, the NUCLEO-F302R8 board, the motor and the DC power supply. The X-NUCLEO-IHM07M1 is a 3 phase brushless DC motor driver expansion board for STM32 Nucleo, based on L6230 driver with integrated overcurrent and thermal protection.
The NUCLEO-F302R8 board provides an affordable and flexible way for users to try out new concepts and to build prototypes with the STM32 MCUs. The integrated ST-LINK/V2-1 provides an embedded in-circuit debugger and programmer for the STM32, so there is no need for a separate probe.
The STM32F302R8 is a 32-bit analogue and DSP, with Floating Point Unit (FPU), ARM Cortex-M4 microcontroller, operating up to 72 MHz, with 64 KB Flash, 12-bit 5MSPS Analogue-to-Digital Converter, Comparator, and Operational-Amplifier.
The Arduino connectivity support and ST Morpho headers make it easy to expand.
The P-NUCLEO-IHM002 pack includes the DC power supply unit.

X-NUCLEO-IHM07M1 features

3 phase driver board for BLDC/PMSM motors based on L6230
Nominal operating voltage range from 8 V to 48 V dc
2.8 A output peak current (1.4 A root mean square)
Non-dissipative overcurrent detection and protection
Full compatible with ST 6-step or ST-FOC-control algorithm
Full support for sensorless and sensor mode
3-Shunt and 1-Shunt configurable jumpers for motor current sensing
Hall encoder motor sensor connector and circuit
Potentiometer available for speed regulation
Compatible with STM32 Nucleo boards
Equipped with ST Morpho connectors

NUCLEO-F302R8 features

STM32F302R8 32-bit Microcontroller based on ARM Cortex-M4 core (72 MHz max) with 64-Kbyte Flash memory and 16-Kbyte SRAM
Two types of extension resources: Arduino UNO Revision 3 connectivity and ST Morpho extension pin headers for full access to all STM32 I/Os
Mbed-enabled (
On-board ST-LINK/V2-1 debugger/programmer with SWD connector: selection-mode switch to use the kit as a standalone ST-LINK/V2-1
Two push buttons: "User" and "Reset"

3 phase motor

Bull-Running model BR2804-1700 kV
Nominal voltage 11.1 V dc (battery up to 3 S)
Maximum DC current: 5 A
Seven pole pairs

DC power supply

Nominal output voltage: 12 V dc
Maximum output current: 2 A
Nominal input voltage: 100 to 240 V ac
Nominal frequency: 50/60 Hz

STM32F3 Series 32-Bit ARM® Cortex®-M4 Microcontrollers, STMicroelectronics

The STM32 F3 series of mixed-signal MCUs with DSP and FPU instructions combines a 32-bit ARM Cortex-M4 core running at 72MHz with an advanced analogue peripheral set.

Fast comparators (50ns)
Programmable gain amplifiers (4 gain ranges)
12-Bit DACs
Fast 12-Bit ADCs (5 MSPS per channel with up to 18MSPS in interleaved mode)
16-Bit sigma-delta ADCs
Fast 144MHz motor control timers, timing resolution better 7ns

Attribute Value
Classification Development Kit
Kit Name Nucleo Pack
Technology MCU, Motor Control
Device Core ARM Cortex M4F
Processor Family Name STM32F3
Processor Part Number STM32F302R8
Processor Type MCU
13 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
473,88 kr
(exkl. moms)
592,35 kr
(inkl. moms)
Per unit
1 +
473,88 kr
Related Products
The TimeFlash programmer allows users to rapidly program ...
The TimeFlash programmer allows users to rapidly program Microchip’s field programmable MEMS oscillator to a custom frequency in seconds, minimizing design time by enabling fast prototyping and testing. Our MEMS oscillators are available in industry standard packages that are drop-in ...
The Projected Capacitive Touch Pad Development Kit enables ...
The Projected Capacitive Touch Pad Development Kit enables designers to create interfaces with single finger gestures to swipe, scroll or double tap controls, integrating gestures and XY touch. Applications include wearable devices such as fitness wristbands, remote control touch pads, ...
4 Kbit and 16 Kbit I²C serial EERAM ...
4 Kbit and 16 Kbit I²C serial EERAM devicesFollows the published recommended capacitor selection for the EERAM deviceTest points with probe loops for SCL, SDA, VCC and GNDOn-board pull-ups for I²C bus operationSMD jumper options for 3.3V and 5V operationOn-board ...
This motor driver evaluation board comes preassembled with ...
This motor driver evaluation board comes preassembled with a VNH5180A-E. It is a system in package full Bridge, manufactured in VIPower M0- 5 technology and housed in the PowerSSO-36 package. The VNH5180A-E is designed to drive 12V automotive bidirectional load, ...