Honeywell Sealed Gauge for Lubricants, Oil, Refrigeration Fluid Pressure Sensor, 100psi Max Pressure Reading , 5 V dc,

  • RS-artikelnummer 111-5907
  • Tillv. PX3AN1BH100PSAAX
  • Tillverkare / varumärke Honeywell
Lagstiftning och ursprungsland
COO (Country of Origin): CN

Honeywell PX3 Series Pressure Transducer

Honeywell PX3 Series heavy duty pressure transducer is a range of highly configurable pressure sensors that use piezoresistive sensing technology with ASIC (Application Specific Integrated Circuit) signal conditioning in a brass housing. The PX3 Series is fully calibrated and compensated for offset, sensitivity, temperature effects and non-linearity using the on-board ASIC.

Pressure range: 1 bar to 46 bar (absolute and sealed gage)
Fully calibrated and temperature compensated
Total Error Band: ±1.0 %FSS from -20 °C to 85 °C [-4 °F to 185 °F]
Insulation resistance: >100 MOhm, 1500 V dc
Dielectric strength: AC1500V, 1 min. or AC1800, 1 s
Current consumption: 3.5 mA max.
Ingress protection up to IP67
Response time: <2 ms
RoHS, REACH, and CE compliant

Attribute Value
Pressure Reading Type Sealed Gauge
Minimum Pressure Reading 0psi
Maximum Pressure Reading 100psi
Accuracy ±0.25 %
Output Type Analogue
Media Measured Lubricants, Oil, Refrigeration Fluid
Electrical Connection Metri-Pack 150
Analogue Output 0 → 4.5 V
Response Time <2 ms
Maximum Current 3.5 mA
Supply Voltage 5 V dc
Housing Material Brass
IP Rating IP67
Mounting Type Threaded
Maximum Operating Temperature +135°C
Minimum Operating Temperature -30°C
Denna produkt har utgått
Related Products
RS Pro IWPT series wireless pressure transducer is ...
RS Pro IWPT series wireless pressure transducer is an effective replacement to a traditionally wired pressure transducer in inaccessible and expensive installation environments. It is easily paired to the compatible RS Pro IWR family of wireless receivers, thus offering a ...
Gems Sensors 5000 series low range pressure transducers ...
Gems Sensors 5000 series low range pressure transducers feature a ceramic diaphragm and precision capacitance technology to detect minute pressure variations, while withstanding large pressure spikes. The tough ceramic sensor is housed in a stainless steel case to ensure performance ...
The IPSU-M12 series is suitable for use in ...
The IPSU-M12 series is suitable for use in a wide range of industrial applications. The probe uses a piezo-resistive ceramic sensor, giving excellent media compatibility within a stainless steel housing The electronics incorporate a microprocessor based amplifier, requiring no adjusting ...
Pressure transmitter - XMEP - 100bar - G1/4A ...
Pressure transmitter - XMEP - 100bar - G1/4A male - 0,5..4,5V - M12 - set of 1.