Bosch Sensortec Barometric Pressure Sensor, Surface Mount, 8-Pin, LGA
- RS-artikelnummer:
- 849-6187
- Tillv. art.nr:
- BMP280
- Tillverkare / varumärke:
- Bosch Sensortec
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
- RS-artikelnummer:
- 849-6187
- Tillv. art.nr:
- BMP280
- Tillverkare / varumärke:
- Bosch Sensortec
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Bosch Sensortec | |
| Sensor Type | Absolute Pressure Sensors | |
| Mounting Type | Surface Mount | |
| Package Type | LGA | |
| Pin Count | 8 | |
| Dimensions | 2.5 x 2 x 0.95mm | |
| Maximum Operating Supply Voltage | 3.6 V | |
| Maximum Operating Temperature | +85 °C | |
| Maximum Output Voltage | 3.6 V | |
| Minimum Output Voltage | 1.2 V | |
| Minimum Operating Temperature | -40 °C | |
| Välj alla | ||
|---|---|---|
Brand Bosch Sensortec | ||
Sensor Type Absolute Pressure Sensors | ||
Mounting Type Surface Mount | ||
Package Type LGA | ||
Pin Count 8 | ||
Dimensions 2.5 x 2 x 0.95mm | ||
Maximum Operating Supply Voltage 3.6 V | ||
Maximum Operating Temperature +85 °C | ||
Maximum Output Voltage 3.6 V | ||
Minimum Output Voltage 1.2 V | ||
Minimum Operating Temperature -40 °C | ||
- COO (Country of Origin):
- DE
BMP280 Digital Barometric Pressure Sensor
The BMP280 is an absolute barometric pressure sensor especially designed for mobile applications
The measurement period consists of a temperature and pressure measurement with selectable oversampling
Operates in three power modes: sleep mode, normal mode, forced mode
A set of oversampling settings is available ranging from ultra low power to ultra high resolution setting in order to adapt the sensor to the target application
The sensor is equipped with a built-in IIR filter in order to minimize short-term disturbances in the output data caused by the slamming of a door or window
Supported digital interfaces are I²C and SPI
Two power supplies for the main power, and separate power for the interface
The measurement period consists of a temperature and pressure measurement with selectable oversampling
Operates in three power modes: sleep mode, normal mode, forced mode
A set of oversampling settings is available ranging from ultra low power to ultra high resolution setting in order to adapt the sensor to the target application
The sensor is equipped with a built-in IIR filter in order to minimize short-term disturbances in the output data caused by the slamming of a door or window
Supported digital interfaces are I²C and SPI
Two power supplies for the main power, and separate power for the interface
Pressure Sensors, Bosch Sensortec
Relaterade länkar
- ADAFRUIT INDUSTRIES BMP280 Barometric Pressure Sensor Barometric Pressure Sensor Sensor Board for BMP280
- Bosch Sensortec 3-Axis Surface Mount Sensor I2C 12-Pin
- Infineon Barometric Pressure Sensor Surface Mount VLGA
- Bosch Sensortec Shuttle Board 3.0 BMP384 Pressure Sensor Shuttle Board for BMP384 APPLICATION Board 3.0
- Bosch Sensortec Temperature & Humidity Sensor Surface Mount SPI ±1°C, 8 Pins
- Infineon Barometric Pressure Sensor Surface Mount 600kPa Overload Max, PG-DSOF-8-16
- TE Connectivity Barometric Pressure Sensor Surface Mount 50bar Overload Max
- TE Connectivity Barometric Pressure Sensor Surface Mount 30bar Overload Max
