Selectivity Module for use with SITOP

  • RS-artikelnummer 714-1262
  • Tillv. art.nr 6EP1961-2BA11
  • Tillverkare / varumärke Siemens
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): AT
Produktdetaljer

SITOP PSE200U Selectivity Module

The SITOP PSE200U selectivity module is the optimal addition to all 24 V power supplies for distributing and monitoring the load current across several branch circuits. Overload and short-circuit in one or more feeders are reliably detected.
The electronics tolerate short-term current peaks, e.g. due to high inrush current, and de-energize feeders with longer overload. This is ensured even on high-resistance cables and for short-circuits that develop slowly over time.
The intact feeders continue to be supplied with 24 V without any interruption or disturbance, thereby minimizing plant downtimes. The faulty feeder is signalled using LEDs and a group signal contact. Regardless of the industry or requirements, Siemens offers reliable and efficient power supplies for every plant.

Features and Benefits:

  • Reliable shutdown in case of overload regardless of cable lengths or cable cross-sections

  • 4 load feeders per module with individually adjustable maximum current for each output

  • Two versions for remote diagnostics: Group signaling contact or single-channel signalling

  • Evaluation via free-of-charge SIMATIC S7 function blocks (S7-1500/1200/300/400) for modules with single-channel signaling (PSE200U)

  • LEDs for rapid on-site fault localization

  • Remote reset possible from a central location (PSE200U)

  • Simple commissioning thanks to manual switch on/off of outputs (PSE200U)

  • Sequential connection of feeders to reduce total inrush current

  • Sealable transparent cover over adjusters for currents and times protects against maladjustment (PSE200U)

Advantages of a selectivity module

A power supply unit (PSU) cannot guarantee a fault-free supply when used on its own. The selectivity module offers reliable detection of overload or short-circuit in the circuit. A selectivity module enables reliable shutdown in case of overload regardless of cable lengths or cross-sections.

Approvals

CE, cULus, UR, CB, ATEX, IEXEx, cCSAus Class I Div 2, GL, ABS

Specifikationer
Attribute Value
Accessory Type Selectivity Module
For Use With SITOP
6 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 140,00 kr
(exkl. moms)
1 425,00 kr
(inkl. moms)
Enheter
Per unit
1 +
1 140,00 kr
Related Products
For applications sensitive to power interruptions, the battery ...
Description:
For applications sensitive to power interruptions, the battery control modules are used to supply voltage after the network has been cut off, allowing for a back-up of the current values or the protection of certain actuators supplied with 24 Vdc.Retaining ...
Miniature size and lightweightQuick and easy mounting onto ...
Description:
Miniature size and lightweightQuick and easy mounting onto 35mm DIN-railSpring clamp terminals72W and 100W meet PFC standard EN61000-3-2Adjustable output voltageOverload and short circuit protectedOutput LED indicatorSuitable for use in harsh environment.
The QUINT-BUFFER/24DC/24DC/40 from Phoenix Contact is a DIN ...
Description:
The QUINT-BUFFER/24DC/24DC/40 from Phoenix Contact is a DIN rail mounting, buffer module with maintenance free capacitor based energy storage. The compact buffer module protects your application from mains failure up to 30 seconds by storing the energy that is required ...
Buffering with service free electrolytic capacitors24V or 48V ...
Description:
Buffering with service free electrolytic capacitors24V or 48V models availableConstant output voltage in buffer modeBuffer time 0.2s at 20A (24V) or 0.1s at 20A (48V)Longer hold-up time at lower levelsBuffer units can be connected in parallel to increase the output ...