onsemi Type C CC and SBU Protection IC Evaluation Board Protection Functions for FUSB251
- RS-artikelnummer:
- 248-5360
- Tillv. art.nr:
- FUSB251GEVB
- Tillverkare / varumärke:
- onsemi
Mängdrabatt möjlig
Antal (1 enhet)*
1 586,14 kr
(exkl. moms)
1 982,68 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 4 enhet(er) från den 15 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 1 | 1 586,14 kr |
| 2 - 4 | 1 526,56 kr |
| 5 + | 1 488,37 kr |
*vägledande pris
- RS-artikelnummer:
- 248-5360
- Tillv. art.nr:
- FUSB251GEVB
- Tillverkare / varumärke:
- onsemi
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | onsemi | |
| Product Type | Evaluation Board | |
| Power Management Function | Protection Functions | |
| Kit Classification | Development Board | |
| Featured Device | FUSB251 | |
| Kit Name | Type C CC and SBU Protection IC Evaluation Board | |
| Standards/Approvals | RoHS | |
| Välj alla | ||
|---|---|---|
Brand onsemi | ||
Product Type Evaluation Board | ||
Power Management Function Protection Functions | ||
Kit Classification Development Board | ||
Featured Device FUSB251 | ||
Kit Name Type C CC and SBU Protection IC Evaluation Board | ||
Standards/Approvals RoHS | ||
The On Semiconductor, designed to be inserted between a board that contains a Type-C controller and a source of voltage for OVP testing, test points and header switches are ready to test OVP and moisture detection functions on CC and SBU, LED indicators will show power status and Interrupt, if there is not access to a Type-C voltage source, test points (GND and VDD) are available on the board for direct power supply connections, the Type-C receptacle can accept a Type-C device such as Type-C charger or memory stick to demonstrate normal USB functionality.
Dead battery mode provides default Rd presenting on CC1/2
24volt DC tolerant on CC and SBU
35V surge protection on CC and SBU
Over voltage protection on CC and SBU
I2C interface with Interrupt for event notification
Moisture detection on CC and SBU pins
On-chip IEC ESD protection with external capacitor on CAP pin
CC Ron 0.3 ohm Typical
SBU Ron 3 ohm Typical
50Mhz Bandwidth on SBU switch
relaterade länkar
- Texas Instruments LM66100 ±6V 1.5A Low IQ Ideal Diode Evaluation Module Protection Functions for LM66100 for LM66100
- ROHM Evaluation Board for IC
- Infineon EVAL_MA5302MS_200WX2 Evaluation Board for EVALMA5302MS200WX2TOBO1 for MA5302MS IC
- Infineon EVAL_MA5342MS_200WX2 Evaluation Board for EVALMA5342MS200WX2TOBO1 for MA5342MS IC
- STMicroelectronics Automotive IC Evaluation Board for Daughter Board, Motherboard for L99H02QF DC Motor Control IC
- ROHM BM1Q104FJ-EVK-001, Evaluation Board Evaluation Board for IC
- SN74LS629N, Function Generator IC
- Texas Instruments XTR111-2EVM IC Development Kit Evaluation Module Evaluation board
