Infineon Evaluation Board For EiceDRIVER Half-Bridge Driver for Drives, EV Charger, Motor Control & Drives, UPS
- RS-artikelnummer:
- 232-5726
- Tillv. art.nr:
- EVAL1ED3890MX12MTOBO1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 enhet)*
1 059,43 kr
(exkl. moms)
1 324,29 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Begränsat lager
- Dessutom levereras 3 enhet(er) från den 08 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 1 | 1 059,43 kr |
| 2 - 4 | 1 006,42 kr |
| 5 + | 979,58 kr |
*vägledande pris
- RS-artikelnummer:
- 232-5726
- Tillv. art.nr:
- EVAL1ED3890MX12MTOBO1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Power Management Function | Half-Bridge Driver | |
| For Use With | Drives, EV Charger, Motor Control & Drives, UPS | |
| Kit Classification | Evaluation Board | |
| Kit Name | Evaluation Board For EiceDRIVER | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Power Management Function Half-Bridge Driver | ||
For Use With Drives, EV Charger, Motor Control & Drives, UPS | ||
Kit Classification Evaluation Board | ||
Kit Name Evaluation Board For EiceDRIVER | ||
Evaluation board for EiceDRIVER™ X3 single-channel highly flexible isolated gate driver family
The EVAL-1ED3890MX12M is in half-bridge configuration with two gate driver ICs (1ED3890MX12M) to drive power switches such as IGBTs, MOSFETs and SiC MOSFETs. The switch type can be freely chosen. The board has a size of 85 x 85 x 15 mm without any power switch assembled.
The board is best suited to leverage the highly configurable X3 Digital (1ED38xx) family with its rich feature-set. Configuration is performed via I2C bus.
The evaluation board is recommended to be used with a companion microcontroller evaluation board EVAL-1ED38X0DCT to optimize the configuration process.
The board is best suited to leverage the highly configurable X3 Digital (1ED38xx) family with its rich feature-set. Configuration is performed via I2C bus.
The evaluation board is recommended to be used with a companion microcontroller evaluation board EVAL-1ED38X0DCT to optimize the configuration process.
Summary of Features
- I2C bus for parameter adjustment, state and fault feedback, ADC measurements and condition monitoring
- Adjustable Clamp/Clamp driver/ADC pin
- Two precise VCEsat detection (DESAT2) circuit with fault output, adjustable leading edge blanking time and individually adjustable trigger voltages, filter times
- Two-level turn-off (TLTO) with adjustable slopes, plateau time and plateau level
- Adjustable soft turn-off after desaturation detection
- Adjustable hardware UVLO with hysteresis for IGBTs and MOSFETs on both VCC2 and VEE2 rails with active shutdown
- ADC measurement of internal parameters: supply voltages and internal temperature
- 40 V absolute maximum output supply voltage
- ± 9 A typical sourcing and sinking gate current capability
- High common-mode transient immunity CMTI = 200 kV/μs
- Small space-saving DSO-16 fine-pitch package with large creepage distance ( >8 mm)
- Gate driver safety certification according to UL 1577 and VDE 0884-11
Benefits
- Enables fast design cycles due to low external component count and still offers adjustable DESAT with Soft-off functionality
- Best-in-class DESAT accuracy: perfect for all applications requiring reliable short-circuit protection (including SiC MOSFET and IGBT7)
- Enables predictive maintenance and rapid prototyping
- The precise threshold and timings, combined with UL 1577 and VDE 0884-11 certification enable superior application safety
- Perfect fit for all applications requiring a reliable DESAT protection, benefit from an active Miller clamp and prefer small PCB space requirements
relaterade länkar
- Infineon Half-Bridge Buck Converter Evaluation Board Using the Eicedriver 2EDL803x Motor Driver for Gate Driver IC for
- Infineon EVAL_1EDF_G1B_HB_GAN Half-Bridge Driver for 1EDF5673K EiceDRIVER™ GaN gate driver IC
- Infineon Half-Bridge Buck Converter Evaluation Board Using the Eicedriver 2EDL803x Microphone Sensor Evaluation Board
- Infineon EiceDRIVER™ 1EDI305xAS Gate Driver Evaluation Board IGBT Gate Driver for 1EDI305xAS for Automotive Motor
- Infineon EiceDRIVER 1EDN751x/1EDN851x Evaluation Board for 1EDN751x/1EDN851x for Gate Driver IC
- Infineon EiceDRIVER 1EDI305xAS Gate Driver Evaluation Board DC-DC Converter for 1EDI305xAS for Automotive Motor Drivers
- ON Semiconductor NCV7703GEVB Triple Half-Bridge Driver Evaluation Board Evaluation Board for NCV7703BD2R2G for
- Infineon EiceDRIVER Enhanced 1EDI302xAS/1EDI303xAS IGBT Gate Driver for IGBT for Auxiliary inverters for HEV and EV,
