Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	TE Connectivity
	Maximum Current Rating	20A
	Maximum Voltage Rating	250 (PH → G) V ac, 440 (PH → PH) V ac
	Mounting Type	Flange Mount
	Termination Style	Threaded Bolt
	Number of Phases	3
	Series	Corcom AYT
	Number of Stages	Two Stage
	Operating Frequency	50 Hz, 60 Hz
	Length	351mm
	Depth	65mm
	Height	141.5mm
	Capacitance	4.47 μF, 260 nF
	Inductance	3.32 mH
	Dimensions	351 x 65 x 141.5mm
	Leakage Current	3.4 mA
	Minimum Operating Temperature	-10°C
	Maximum Operating Temperature	+40°C
	Standards Met	CSA 22.2 No. 0/0.4/8, UL 1283, VDE 0565-3

	Välj alla
	Brand TE Connectivity
	Maximum Current Rating 20A
	Maximum Voltage Rating 250 (PH → G) V ac, 440 (PH → PH) V ac
	Mounting Type Flange Mount
	Termination Style Threaded Bolt
	Number of Phases 3
	Series Corcom AYT
	Number of Stages Two Stage
	Operating Frequency 50 Hz, 60 Hz
	Length 351mm
	Depth 65mm
	Height 141.5mm
	Capacitance 4.47 μF, 260 nF
	Inductance 3.32 mH
	Dimensions 351 x 65 x 141.5mm
	Leakage Current 3.4 mA
	Minimum Operating Temperature -10°C
	Maximum Operating Temperature +40°C
	Standards Met CSA 22.2 No. 0/0.4/8, UL 1283, VDE 0565-3

Logga in för att ladda ner CAD-modeller

Corcom A Series 3-phase RFI power line filters

Corcom filters are recognized worldwide for providing EMI/RFI filtering solutions. TE offers over 70 Corcom filter series that are suitable for a wide range of applications across multiple industries. All Corcom filters have been designed and tested for susceptibility and/or emissions applications and have received approval from major safety agencies throughout the world including UL, CSA and VDE.

Corcom A series filters are designed for 3-phase, four wire, WYE applications. This series of RFI filters offers both common mode and differential mode suppression and filters each of the three lines plus the neutral and ground line. Suitable for use for wide band RFI suppression with noise emissions, typical applications include large machine tools, input filter for motor drives and customer machinery.

Common mode and differential mode suppression from 50 kHz → 30MHz
Optional panel mounting brackets and end bell kits are available, end bells shield the input and output terminals
Ground choke included
Effective for both balanced and unbalanced loads
AYP Series single stage for lower noise environments
AYT Series dual stage provides highest performance

Approvals

UL, CSA and VDE

TE Connectivity, Corcom AYT 20A 250 (PH → G) V ac, 440 (PH → PH) V ac 50 Hz, 60 Hz, Flange Mount RFI

Corcom A Series 3-phase RFI power line filters

Approvals

relaterade länkar