Knipex 35 42 Bevel Precision Diagonal Cutter
- RS-artikelnummer:
- 238-6961
- Distrelec artikelnummer:
- 180-57-928
- Tillv. art.nr:
- 35 42 115
- Tillverkare / varumärke:
- Knipex
Antal (1 enhet)*
527,20 kr
(exkl. moms)
659,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 14 enhet(er) är redo att levereras
- Plus 11 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 + | 527,20 kr |
*vägledande pris
- RS-artikelnummer:
- 238-6961
- Distrelec artikelnummer:
- 180-57-928
- Tillv. art.nr:
- 35 42 115
- Tillverkare / varumärke:
- Knipex
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Knipex | |
| Product Type | Long Nose Plier | |
| Sub Type | Precision Diagonal Cutter | |
| Non-Sparking | No | |
| Overall Length | 115mm | |
| Jaw Width | 8mm | |
| Jaw Length | 22.5mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Electronic, Precision Cutting, Small Component, Diagonal Cutter | |
| Jaw Material | Ball Bearing Chrome Steel | |
| ESD Safe | No | |
| Handle Material | Forged Steel | |
| Grip Material | Multi Component Plastic | |
| Standards/Approvals | ASME B107.20, IEC 60900, DIN EN 60900, VDE-Tested, DIN ISO 5745, DIN ISO 5746 | |
| Maximum Cutting Capacity | 3.8mm | |
| Cut Type | Bevel | |
| Välj alla | ||
|---|---|---|
Brand Knipex | ||
Product Type Long Nose Plier | ||
Sub Type Precision Diagonal Cutter | ||
Non-Sparking No | ||
Overall Length 115mm | ||
Jaw Width 8mm | ||
Jaw Length 22.5mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Electronic, Precision Cutting, Small Component, Diagonal Cutter | ||
Jaw Material Ball Bearing Chrome Steel | ||
ESD Safe No | ||
Handle Material Forged Steel | ||
Grip Material Multi Component Plastic | ||
Standards/Approvals ASME B107.20, IEC 60900, DIN EN 60900, VDE-Tested, DIN ISO 5745, DIN ISO 5746 | ||
Maximum Cutting Capacity 3.8mm | ||
Cut Type Bevel | ||
RoHS-status: Undantagen
- COO (Country of Origin):
- DE
Pliers - 45° flat smooth tips - 115mm
The Knipex electronics plier has narrow sleeves pulled up to the head of the plier enable the tool to be guided securely and comfortably, also between thumb and index finger. It has Smooth ground gripping surfaces. It has 115 mm length. The polishing or mirror polishing (only finish 2) in combination with the thin oil layer offers good protection against rust, thus avoiding disturbances in electronic circuits caused by flaking chrome particles.
Features and Benefits
Bi-material sheathing
Precision pliers for high-precision assembly work, e.g. in the fields of electronics and precision mechanics - For gripping, holding and bending
Precision hinge with a gap between the jaws
Smooth inside of the jaws
Carefully deburred edges;Chrome plated steel for ball bearings
Standards
DIN ISO 9655