Schneider Electric M340 PLC I/O Module 4 Inputs, 24 V dc

Lagstiftning och ursprungsland
COO (Country of Origin): FR

Modicon M340 Analogue Input Module

The BMX AMI 0410 module is a high-level analogue input module with 4 isolated inputs (16 bits). Used with sensors or transmitters, it performs monitoring, measurement and process control functions for continuous processes.The module operates with voltage inputs. It includes four reading resistors connected to the terminal block to form the current inputs

For each input, the BMX AMI 0410 module offers the following ranges:

Voltage ±10V, ±5V, 0 to 10V, 0 to 5V and 1 to 5V
Current 0...20mA, 4…20mA and ±20mA, depending on the choice made during configuration

Schneider Electric Modicon M340 PLC

Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution.


Data rate: 20kb/s to 1Mb/s (bus length dependent)
Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory

Compact design

3 communication ports integrated in the processor
Mounting in low depth cabinet (<150mm)
High-density discrete I/O modules with 64 channels in a 32mm wide format

Communicative, with its integrated ports

CANopen machine and installation bus
Ethernet TCP/IP network - Transparent Ready
Modbus serial link or character mode
Remote access via STN, GSM, Radio or ADSL


Counter modules with ready-to-use functions
Function block library dedicated to motion control. MF(Motion Function Blocks) to the PLCopen standard
Advanced library of process control blocks oriented towards control of machinery

Innovative and Ruggedness

USB port as standard
Embedded webserver
Recipe file management via FTP protocol
“Plug and Load” SD memory card
No batteries
Rack architecture enabling hot swapping of modules during operation (Hot-Swap)
Exceeds the standards in terms of shocks, vibrations, temperature, altitude and withstand to electrical interference.


Attribute Value
Manufacturer Series M340
Number of Inputs 4
Input Type Analogue
For Use With M340 Series
Number of I/O 4
Voltage Category 24 V dc
12 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
2 776,49 kr
(exkl. moms)
3 470,61 kr
(inkl. moms)
Per unit
1 +
2 776,49 kr
Related Products
These modules convert digital PLC values into 2 ...
These modules convert digital PLC values into 2 independent channels of analogue voltage or current outputs. 16 bit resolutionFast conversion rate improves controlBuilt-in EEPROM for storing set-up dataOnly occupies 16 PLC I/O points, great for compact systemsOutput short circuit protection ...
Supplied in die-cast casings for extra durability, and ...
Supplied in die-cast casings for extra durability, and available in full height and half height modules. With the exception of the first slot (that will only accept a full height module), 1 slot within the Micro PLC rack can accommodate ...
This slave module can be used with 24Vdc ...
This slave module can be used with 24Vdc powered modular smart relays (types SR3 BxxxBD) in addition to any I/O extension fitted. Addresses available are 0-2474 inputs, 4 outputs and 4 parameter bits.
132 with screw/spring terminal digital I/O244 with HE10 ...
132 with screw/spring terminal digital I/O244 with HE10 type connector digital I/O48 analogue I/O (24 input/24 output channels). 3 Communication base modules each with 20 I/O Expandable using 8 to 32 channel I/O modules (up to 264 channels)Wide range of ...