Senaste sökningar

    RS PRO Opaque Fluoroplastics PTFE Rod, 500mm x 65mm Diameter

    RS-artikelnummer:
    196-9966
    Tillverkare / varumärke:
    RS PRO
    RS PRO
    Se alla Plastic Rods
    16 I lager för avsändande samma dag
    Add to Basket
    Parti(er)

    Lagt till varukorgen

    Pris (ex. moms) 1 Lot of 1

    2 045,46 kr

    (exkl. moms)

    2 556,82 kr

    (inkl. moms)

    Parti(er)Per Lot
    1 - 22 045,46 kr
    3 - 51 902,24 kr
    6 - 111 799,98 kr
    12 +1 636,28 kr
    RS-artikelnummer:
    196-9966
    Tillverkare / varumärke:
    RS PRO
    COO (Country of Origin):
    IT

    Datablad


    Lagstiftning och ursprungsland

    COO (Country of Origin):
    IT

    Produktdetaljer

    RS PRO Opaque Fluoroplastics PTFE Rod, 500 mm x 65 mm Diameter


    If you need a durable rod that can hold up in harsh conditions, turn to this opaque fluoroplastics PTFE (polytetrafluoroethylene) rod from the RS PRO range. It's 500 mm long and 65 mm in diameter.

    This rod is highly resistant to chemicals and radiation, thanks to its PTFE construction. Its dielectric properties make it an excellent insulator, and it can withstand temperatures as high as +260°C. It has a high tensile strength of 25 MPa and is low-friction and low-adhesion.

    Part of the RS PRO series, the rod is tested by engineers to give you full confidence in its performance. It meets DIN (Deutsches Institut für Nurmung, German Institute for Standardization) and ASTM-D (American Society for Testing and Materials) standards for plastic and elastomer testing. A UL 94 V-0 flammability rating from the science safety company Underwriters Laboratories means it's flame-retardant.

    The fluoroplastics PTFE rod is suitable for pipe lining, high-frequency insulation and etching plates.


    Features and Benefits


    • Fluoroplastics PTFE (polytetrafluoroethylene) rod
    • Opaque in colour
    • Length of 500 mm
    • Diameter of 65 mm
    • Elongation of 50%
    • Density of 2.18 → 2.21 g/cm³
    • Tensile strength of 25 MPa
    • Hardness of 30 Ball Indentation
    • Maximum operating temperature of +260°C
    • Melting point of +327°C
    • Thermal conductivity of 0.25 W/mK
    • Water absorption of 0.3%
    • UL 94 V-0 flammability rating
    • Conforms to DIN 53479, DIN 53736 and ASTM-D 1929 for testing of plastics and elastomers


    RS PRO


    RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards

    they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.


    Note

    The PTFE sheets supplied have a size tolerance of ±5 mm

    Standards

    DIN 53479; DIN 53736; ASTM-D 1929


    Specifikationer

    AttributeValue
    ColourOpaque
    Length500mm
    MaterialPTFE
    FormRod
    Rod Diameter65mm
    Density2.18 → 2.21g/cm³
    Tensile Strength25 MPa
    Maximum Operating Temperature+260°C
    Flammability RatingUL 94 V-0
    SuitabilityEtching Plates & High Frequency Insulation, Pipe Lining, Pump Housing, Roller Covering, Slide Bearing & Runners
    Water Absorption0.3%
    Melting Point+327°C
    Elongation50%
    Thermal Conductivity0.25W/mK
    Hardness30 Ball Indentation
    16 I lager för avsändande samma dag
    Add to Basket
    Parti(er)

    Lagt till varukorgen

    Pris (ex. moms) 1 Lot of 1

    2 045,46 kr

    (exkl. moms)

    2 556,82 kr

    (inkl. moms)

    Parti(er)Per Lot
    1 - 22 045,46 kr
    3 - 51 902,24 kr
    6 - 111 799,98 kr
    12 +1 636,28 kr