Microchip Physical Layer Transceiver 24-Pin QFN, KSZ8081RNACA
- RS-artikelnummer:
- 215-3275
- Tillv. art.nr:
- KSZ8081RNACA
- Tillverkare / varumärke:
- Microchip
Antal (1 förpackning med 10 enheter)*
110,74 kr
(exkl. moms)
138,42 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 14 450 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 10 + | 11,074 kr | 110,74 kr |
*vägledande pris
- RS-artikelnummer:
- 215-3275
- Tillv. art.nr:
- KSZ8081RNACA
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Typical Data Rate | 100Mbps | |
| Integrated CDR | No | |
| Power Supply Type | Single | |
| Typical Operating Supply Voltage | 3.3 V | |
| JTAG Support | No | |
| Package Type | QFN | |
| Pin Count | 24 | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Typical Data Rate 100Mbps | ||
Integrated CDR No | ||
Power Supply Type Single | ||
Typical Operating Supply Voltage 3.3 V | ||
JTAG Support No | ||
Package Type QFN | ||
Pin Count 24 | ||
The Microchip KSZ8081RNA/RND is a single-supply 10BASE-T/100BASE-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. It is a highly-integrated PHY solution. It reduces board cost and simplifies board layout by using on-chip termination resistors for the differential pairs and by integrating a low-noise regulator to supply the 1.2V core, and by offering 1.8/2.5/3.3V digital I/O interface support.
Single-Chip 10BASE-T/100BASE-TX IEEE 802.3
Compliant Ethernet Transceiver
RMII v1.2 Interface Support with a 50 MHz Reference Clock Output to MAC, and an Option to Input a 50 MHz Reference Clock
RMII Back-to-Back Mode Support for a 100 Mbps Copper Repeater
MDC/MDIO Management Interface for PHY Register Configuration
Programmable Interrupt Output
LED Outputs for Link and Activity Status Indication
Compliant Ethernet Transceiver
RMII v1.2 Interface Support with a 50 MHz Reference Clock Output to MAC, and an Option to Input a 50 MHz Reference Clock
RMII Back-to-Back Mode Support for a 100 Mbps Copper Repeater
MDC/MDIO Management Interface for PHY Register Configuration
Programmable Interrupt Output
LED Outputs for Link and Activity Status Indication