Microchip , 1-Channel Ethernet Transceiver 48-Pin LQFP, KSZ8081MLXIA
- RS-artikelnummer:
- 177-3902
- Tillv. art.nr:
- KSZ8081MLXIA
- Tillverkare / varumärke:
- Microchip
Antal (1 förpackning med 5 enheter)*
84,94 kr
(exkl. moms)
106,175 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 1 735 enhet(er) från den 09 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 5 + | 16,988 kr | 84,94 kr |
*vägledande pris
- RS-artikelnummer:
- 177-3902
- Tillv. art.nr:
- KSZ8081MLXIA
- Tillverkare / varumärke:
- Microchip
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Microchip | |
| Number of Channels per Chip | 1 | |
| Typical Data Rate | 100Mbit/s | |
| Power Supply Type | Single | |
| Typical Operating Supply Voltage | 3.3 V | |
| Mounting Type | Surface Mount | |
| Package Type | LQFP | |
| Pin Count | 48 | |
| Dimensions | 7 x 7 x 1.45mm | |
| Maximum Operating Temperature | +85 °C | |
| Minimum Operating Temperature | -40 °C | |
| Välj alla | ||
|---|---|---|
Brand Microchip | ||
Number of Channels per Chip 1 | ||
Typical Data Rate 100Mbit/s | ||
Power Supply Type Single | ||
Typical Operating Supply Voltage 3.3 V | ||
Mounting Type Surface Mount | ||
Package Type LQFP | ||
Pin Count 48 | ||
Dimensions 7 x 7 x 1.45mm | ||
Maximum Operating Temperature +85 °C | ||
Minimum Operating Temperature -40 °C | ||
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.
Single-chip 10Base-T/100Base-TX Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed