Microchip Technology KSZ8041TL Ethernet Transceiver, 3.3 V, 48-Pin TQFP
- RS-artikelnummer 177-3527
- Tillv. art.nr KSZ8041TL
- Tillverkare / varumärke Microchip
The KSZ8041 is a single supply 10Base-T/100Base-TX Physical Layer Transceiver, which provides MII/RMII/SMII interfaces to transmit and receive data.
Single-chip 10Base-T/100Base-TX physical layer solution
Low power
Power consumption of <180mW
Power down and power saving modes
Built-in 1.8V regulator for core
Single power supply (3.3V)
HP auto MDI/MDI-X for reliable detection and correction for straight-through and crossover cables with disable and enable option
Robust operation over standard cables
MII interface support (KSZ8041NL only)
RMII Interface Support
External 50MHz system clock (KSZ8041NL or KSZ8041TL/FTL)
25MHz crystal/clock input and 50MHz reference clock output to MAC (KSZ8041RNL)
SMII Interface Support
External 125MHz system clock and 12.5MHz sync clock from MAC (KSZ8041TL/FTL only)
Fiber support 100Base-FX (KSZ8041FTL only)
MIIM (MDC/MDIO) management bus to 6.25MHz for rapid PHY register configuration
Interrupt pin option
| Attribute | Value |
|---|---|
| Standard Supported | IEEE 802.3, IEEE 802.3u, 10BASE-T, 100BASE-FX, 100BASE-TX |
| Number of Channels per Chip | 1 |
| Typical Data Rate | 100Mbit/s |
| Power Supply Type | Single |
| Typical Operating Supply Voltage | 3.3 V |
| Mounting Type | Surface Mount |
| Package Type | TQFP |
| Pin Count | 48 |
| Dimensions | 7 x 7 x 1mm |
| Height | 1mm |
| Length | 7mm |
| Maximum Operating Temperature | +70 °C |
| Minimum Operating Temperature | 0 °C |
| Width | 7mm |
