Block 12 V 1 Output Pin PCB Transformer, VDE 0570 part 2-1, ENEC 10 (VDE), DIN EN 61558-2-1, C-UL-US, DIN EN 61558-2-6,
- RS-artikelnummer:
- 732-0288
- Tillv. art.nr:
- VB 0,35/1/12
- Tillverkare / varumärke:
- Block
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
Alternativ
Denna produkt är för närvarande inte tillgänglig. Vi rekommenderar denna produkt istället.
Varje
100,80 kr
(exkl. moms)
126,00 kr
(inkl. moms)
- RS-artikelnummer:
- 732-0288
- Tillv. art.nr:
- VB 0,35/1/12
- Tillverkare / varumärke:
- Block
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Block | |
| Product Type | PCB Transformer | |
| Secondary Voltage | 12 V | |
| Primary Voltage | 230 V | |
| Number of Outputs | 1 | |
| Length | 22mm | |
| Width | 22.7 mm | |
| Power | 0.35VA | |
| Depth | 15mm | |
| Weight | 0.02kg | |
| Mount Type | Pin | |
| Isolation Voltage | 5000V | |
| Maximum Operating Temperature | 70°C | |
| Efficiency | 30% | |
| Series | VB 0.35/1/12 | |
| Minimum Operating Frequency | 50Hz | |
| Standards/Approvals | VDE 0570 part 2-1, ENEC 10 (VDE), DIN EN 61558-2-1, C-UL-US, DIN EN 61558-2-6, IEC 61558-2-1, IEC 61558-2-6, VDE 0570 Part 2-6 | |
| Maximum Operating Frequency | 60Hz | |
| Välj alla | ||
|---|---|---|
Brand Block | ||
Product Type PCB Transformer | ||
Secondary Voltage 12 V | ||
Primary Voltage 230 V | ||
Number of Outputs 1 | ||
Length 22mm | ||
Width 22.7 mm | ||
Power 0.35VA | ||
Depth 15mm | ||
Weight 0.02kg | ||
Mount Type Pin | ||
Isolation Voltage 5000V | ||
Maximum Operating Temperature 70°C | ||
Efficiency 30% | ||
Series VB 0.35/1/12 | ||
Minimum Operating Frequency 50Hz | ||
Standards/Approvals VDE 0570 part 2-1, ENEC 10 (VDE), DIN EN 61558-2-1, C-UL-US, DIN EN 61558-2-6, IEC 61558-2-1, IEC 61558-2-6, VDE 0570 Part 2-6 | ||
Maximum Operating Frequency 60Hz | ||
- COO (Country of Origin):
- DE

Transformers PCB Mount, Short Circuit Proof, VB & PT Series
230Va.c. 50 to 60Hz primary
Single or twin secondary windings for series or parallel connection (For conformance reasons,0.35 to 3.2VA transformers with 2 x 15 and 2 x 18V outputs and all transformers with 2x 24V outputs should not have their secondaries connected in series as this means they will not meet the VDE 0550 approval)
VB series (0.35 - 3.2VA) are inherently short circuit proof
PT series (4.5 - 22VA) are protected by internal PTC device
Compact design
Vacuum epoxy resin moulded to UL94-V0 rating
Double section glass fibre reinforced polyamide bobbins
100% electrical and flash tested
High efficiency and low temperature rise
Low inter-winding capacitance
Low radiated noise
Extra fixing holes for secure boarding mounting on 4.5VA and above
Approvals
ENEC 10; UL recognised component
Standards
EN 61558
relaterade länkar
- Block 12V 1 Output Through Hole PCB Transformer CE EN61558-2-6 UL
- Block 9V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 18V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 24V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 15V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 6V ac 1 Output Through Hole PCB Transformer, 0.35VA
- Block 12V ac 2 Output Through Hole PCB Transformer, 0.35VA
- Block 6V ac 1 Output Through Hole PCB Transformer CE IEC/EN VDE

