Phoenix Contact 5/ 4-5, 08, SMKDSN 1 Series PCB Terminal Block, 4-Contact, 5.08mm Pitch, Solder Mount, 1-Row, Screw

Se alla PCB Terminal Blocks

Antal (1 låda med 5 enheter)*

90,44 kr

(exkl. moms)

113,05 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Lagerinformation är för närvarande otillgänglig
Låda(or)
Per Låda
Per enhet*
1 +90,44 kr18,088 kr

*vägledande pris

RS-artikelnummer:
286-0972
Tillv. art.nr:
1869237
Tillverkare / varumärke:
Phoenix Contact
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Phoenix Contact

Number of Contacts

4

Pitch

5.08mm

Number of Rows

1

Mounting Type

Solder Mount

Gender

Male

Termination Method

Screw

Series

5/ 4-5, 08, SMKDSN 1

COO (Country of Origin):
DE

Phoenix Contact COMBICON SMKDSN 5.08mm Angled PCB Terminal Block


The SMKDSN range from Phoenix Contact are PCB terminal blocks that are 5.08mm pitched and feature a 45° connection direction. Phoenix's contacts are known world-wide so incorporating this PCB terminal block into your design allows you maximum flexibility and worldwide use. Not to mention, these connectors feature a low-temperature rise thanks to its maximum contact force and with the connector being angled, you can have a multi-row arrangement on the PCB. Screw connection terminals allow you to easily connect your wire and have a reliable connection, easily.

These PCB terminal blocks are designed to be wave soldered onto the PCB and have current ratings of 13.5A.

Features and benefits:


  • Angled connector - allowing for connection of two conductors while also enabling multi-row arrange on the PCB

  • Extremely small design for the respective conductor cross-section

  • World-wide known connection technology for maximum versatility

  • Linear pinning on pin-out

  • Built from a durable polyamide material while being green in colour

How do PCB terminal blocks work?


PCB terminal blocks simply allow you to connect wire into a socket that then transmits the data to the PCB. They work by having you plug in a wire of the correct AWG into the socket that is then usually locked down by either a screw or spring-cage for a strong connection. This connection is also connected to the output pins that have been soldered onto the PCB.

Approvals

UL (E60425); CSA (LR13631)

relaterade länkar