LCBSBM-8-01 ART, 12.7mm High Nylon PCB Support for 3.18mm PCB Hole, 12.7 x 12.7mm Base
- RS-artikelnummer:
- 220-800
- Tillv. art.nr:
- LCBSBM-8-01 ART
- Tillverkare / varumärke:
- Essentra
Mängdrabatt möjlig
Antal (1 förpackning med 50 enheter)*
215,85 kr
(exkl. moms)
269,80 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 10 100 enhet(er) är redo att levereras
- Plus 1 350 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 50 - 450 | 4,317 kr | 215,85 kr |
| 500 - 950 | 4,144 kr | 207,20 kr |
| 1000 - 2450 | 4,014 kr | 200,70 kr |
| 2500 + | 3,665 kr | 183,25 kr |
*vägledande pris
- RS-artikelnummer:
- 220-800
- Tillv. art.nr:
- LCBSBM-8-01 ART
- Tillverkare / varumärke:
- Essentra
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Essentra | |
| Overall Height | 21.4mm | |
| PCB Support Type | Adhesive-Backed Support | |
| Body Height | 12.7mm | |
| Support Base Dimensions | 12.7 x 12.7mm | |
| PCB Hole Diameter | 3.18mm | |
| PCB Thickness | 1.57mm | |
| Material | Nylon | |
| Support Base Length | 12.7mm | |
| Support Base Width | 12.7mm | |
| Välj alla | ||
|---|---|---|
Brand Essentra | ||
Overall Height 21.4mm | ||
PCB Support Type Adhesive-Backed Support | ||
Body Height 12.7mm | ||
Support Base Dimensions 12.7 x 12.7mm | ||
PCB Hole Diameter 3.18mm | ||
PCB Thickness 1.57mm | ||
Material Nylon | ||
Support Base Length 12.7mm | ||
Support Base Width 12.7mm | ||
- COO (Country of Origin):
- GB
Miniature Adhesive Backed Supports
PCB supports moulded in nylon, with an adhesive covered base which is protected by a removable strip until fitting
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm
The board to be supported is retained securely by the locking barb, but may be removed when required
The support can be permanently fixed to most smooth and clean surfaces, due to the good retention properties of the adhesive
As the supports require no fixing screws they are particularly useful where a tapped support pillar cannot be used, e.g. on the rear of front panels
Working temperature range: -20°C to +90°C
Colour is natural
Base 12.7 x 12.7mm
PCB Thickness 1.6mm
Hole dia 3.18mm