Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 2 Contact(s), 3 mm Pitch, 1 Row, Shrouded

RS-artikelnummer:: 670-4698
Distrelec artikelnummer:: 304-42-700
Tillv. art.nr:: 43650-0200
Tillverkare / varumärke:: Molex

Molex Micro-Fit 3.0 Series Right Angle Through Hole PCB Header, 2 Contact(s), 3 mm Pitch, 1 Row, Shrouded

Mängdrabatt möjlig

Antal (1 förpackning med 5 enheter)*

91,28 kr

(exkl. moms)

114,10 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

285 enhet(er) är redo att levereras
Plus 200 enhet(er) är redo att levereras från en annan plats
Dessutom levereras 3 665 enhet(er) från den 20 januari 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet	Per förpackning*
5 - 95	18,256 kr	91,28 kr
100 - 370	12,476 kr	62,38 kr
375 - 1495	11,984 kr	59,92 kr
1500 - 2995	11,02 kr	55,10 kr
3000 +	10,596 kr	52,98 kr

*vägledande pris

RS-artikelnummer:: 670-4698
Distrelec artikelnummer:: 304-42-700
Tillv. art.nr:: 43650-0200
Tillverkare / varumärke:: Molex

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Molex
	Series	Micro-Fit 3.0
	Product Type	PCB Header
	Pitch	3mm
	Current	5A
	Number of Contacts	2
	Housing Material	Thermoplastic
	Number of Rows	1
	Orientation	Right Angle
	Shrouded/Unshrouded	Shrouded
	Connector System	Wire-to-Board
	Mount Type	Through Hole
	Contact Material	Brass
	Contact Plating	Tin
	Row Pitch	3mm
	Termination Type	Solder
	Minimum Operating Temperature	-40°C
	Contact Gender	Male
	Maximum Operating Temperature	105°C
	Standards/Approvals	No
	Voltage	250 V

	Välj alla
	Brand Molex
	Series Micro-Fit 3.0
	Product Type PCB Header
	Pitch 3mm
	Current 5A
	Number of Contacts 2
	Housing Material Thermoplastic
	Number of Rows 1
	Orientation Right Angle
	Shrouded/Unshrouded Shrouded
	Connector System Wire-to-Board
	Mount Type Through Hole
	Contact Material Brass
	Contact Plating Tin
	Row Pitch 3mm
	Termination Type Solder
	Minimum Operating Temperature -40°C
	Contact Gender Male
	Maximum Operating Temperature 105°C
	Standards/Approvals No
	Voltage 250 V

Logga in för att ladda ner CAD-modeller

Molex PCB Header, Black Colour, Right-Angle Body Orientation - Micro-Fit 3.0 Series - 43650-0200

Keen to connect your components in a flash? Choose this two-way PCB header from Molex to link accessories such as sensors, displays or communication devices to your board. A locking ramp ensures modules are attached securely and there's no risk of accidental detachment that could cause a glitch in your system. Flame-retardant liquid crystal polymer housing means this unit can handle extreme temperatures of up to +265°C during IR reflow soldering without breaking a sweat.

Features & Benefits

• Brass contacts resist corrosion and wear to deliver long-term service

• Plastic peg PCB locks make installation speedy

• 5A current rating ensures seamless compatibility with standard components

Applications

• Renewable energy generation

• Transportation systems

• Consumer electronics

How do I mount this header?

Installation is a matter of just slotting the header's pins through corresponding holes on your board and soldering them in place.

Molex Micro-Fit 3.0 3.0mm Single Row PCB Headers with Snap in Plastic Peg PCB Lock, 43650 Series

Micro-Fit 3.0 3mm pitch wire to board single row PCB headers which form part of a Compact power connector system providing a low to mid-range power distribution solution. With the Ability to carry up to 5A of current, Micro-Fit 3.0 connectors have one of the highest current carrying abilities in the smallest footprints available. These Micro-Fit 3.0 PCB headers incorporate positive latching in the form of a locking ramp on the housing for secure mating and to prevent accidental disconnection. The housings are MADE of high-temperature UL 94V-0 Liquid Crystal Polymer that can withstand temperatures of up to 265°C during the IR reflow soldering process. The through hole mounting versions of these Micro-Fit 3.0 headers are also SMT compatible which means a reduction in process requirements and costs. To secure these Micro-Fit 3.0 headers to the PCB board, snap-in plastic peg PCB locks are incorporated into the connector design. The contacts of these Micro-Fit 3.0 headers are fully isolated within the housings to reduce arcing. Tin or a choice of two thicknesses of gold contact platings are available to keep down costs

Features and Benefits

• High current carrying capacity in a small footprint

• High temperature housings for IR reflow soldering

• Through hole versions SMT compatible

• Positive latching for secure mating connection

• Fully isolated dual beam terminals for reliable electrical performance and contact

• Plastic peg PCB locks for secure connection to PCB

• Glow Wire Compliant

Product Application Information

These Micro-Fit 3.0 header connectors are suitable for use in a wide range of low to mid power applications including the following:

Military COTS (Commercial Off The Shelf)

Solar power

Consumer products (dryers, freezers, fridges, washing machines)

Data communications (routers, servers)

Medical

Telecommunications

Gaming terminals