Pico Technology Oscilloscope Probe, Probe Type: Active, Differential 25MHz 700V

  • RS-artikelnummer 898-6744
  • Tillv. art.nr TA041
  • Tillverkare / varumärke Pico Technology
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): TW
Produktdetaljer

Pico Technology Oscilloscope Probe

The Pico Technology TA041 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±700V. It can be used with a signal speed of up to 25Hz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.

Features and Benefits

• Bandwidth is DC to 25MHz (–3dB)
• Attenuation ratio is 10:1/100:1
• Accuracy is ±2%
• Input impedance is 4Mohm ll5.5pF each side to ground
• Differential range is (10:1) ±70V (DC + peak AC) or 70VRMS
• Maximum differential is (100:1) ±700V (DC + peak AC) or 700VRMS
• Common mode range is ±700V (DC + peak AC) or 700VRMS (10:1 & 100:1)
• Absolute maximum voltage is ±1400V (DC + peak AC) or 1000VRMS (10:1 & 100:1)
• Swing is ±7V into 2kohm load
• Offset (typical) is <±5mV
• Noise (typical) is 0.7mVRMS
• Source impedance is 1ohm at 1kHz and 8ohm at 20kHz
• CMRR (typical) is 86dB at 50Hz and 66dB at 1MHz
• Ambient operating temperature ranges between -10°C and 40°C
• Power requirement 4xAA cells or 6VDC/60mA mains adaptor or regulated 9VDC/40mA mains adaptor

Applications

• Safe measurement in power circuit
• Acquisition of low speed balanced differential signals found in serial communications buses
• Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays
• Signals in the milliV range from sensors and other instrumentation

Certifications

• IEC-1010.1
• IEC-1010.2-031 CAT III
• Pollution Degree 2.

Specifikationer
Attribute Value
Probe Type Active, Differential
Attenuation 1:10, 1:100
Bandwidth 25MHz
Maximum Common Mode Input Voltage 700V
Number of Probes 2
Safety Category Level CAT III
Safety Category Voltage ±700 V, 700 Vrms
Safety Category CAT III ±700 V, 700 Vrms
18 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
3 298,46 kr
(exkl. moms)
4 123,08 kr
(inkl. moms)
Enheter
Per unit
1 +
3 298,46 kr
Related Products
Tektronix P2221 Passive Probe, 1x/10x, 200 MHz Passive ...
Description:
Tektronix P2221 Passive Probe, 1x/10x, 200 MHz Passive Voltage Probe.P2221 is compatible with MSO2000 and DPO2000 Series oscilloscopes. Relative Low-frequency Computer and Telecom measurments Power Supplies Low Frequency Amplifiers.
An indispensable accessory for analogue or digital oscilloscopes ...
Description:
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements.1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...
For design, validation, debugging and characterization of common ...
Description:
For design, validation, debugging and characterization of common high-speed serial bus designs including I2C, CAN/LIN, SPI, Serial ATA, Ethernet (GbE), USB 2.0, FireWire (1394b); signal integrity, jitter and timing analysis; manufacturing engineering and test. Accurate measurements for serial and digital ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip ...