ISL28148FHZ-T7A Renesas Electronics, Precision, Op Amps, RRIO, 4.5MHz, 2.4 → 5.5 V, 6-Pin SOT-23
- RS-artikelnummer:
- 193-1510
- Tillv. art.nr:
- ISL28148FHZ-T7A
- Tillverkare / varumärke:
- Renesas Electronics
Tyvärr har vi inte denna produkt i lager.
Restorder ej möjlig på grund av bristande allokering. Den evt. angivna systemtekniska leveranstiden är inte giltig.
Pris (ex. moms) Var (i en rulle med 250)
21,483 kr
(exkl. moms)
26,854 kr
(inkl. moms)
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 250 + | 21,483 kr | 5 370,75 kr |
- RS-artikelnummer:
- 193-1510
- Tillv. art.nr:
- ISL28148FHZ-T7A
- Tillverkare / varumärke:
- Renesas Electronics
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
The ISL28148, ISL28248 are 4.5MHz low-power single and dual operational amplifiers. The parts are optimized for single supply operation from 2.4V to 5.5V, allowing operation from one lithium cell or two Ni-Cd batteries.
The single and dual feature an Input Range Enhancement Circuit (IREC), which enables them to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.25V above the positive supply and to 100mV below the negative supply with only a slight degradation of the CMRR performance. The output operation is rail-to-rail.
The parts draw minimal supply current (900μA per amplifier) while meeting excellent DC accuracy, AC performance, noise and output drive specifications. The ISL28148 features an enable pin that can be used to turn the device off and reduce the supply current to a maximum of 16μA. Operation is guaranteed across the -40°C to +125°C temperature range.
The single and dual feature an Input Range Enhancement Circuit (IREC), which enables them to maintain CMRR performance for input voltages greater than the positive supply. The input signal is capable of swinging 0.25V above the positive supply and to 100mV below the negative supply with only a slight degradation of the CMRR performance. The output operation is rail-to-rail.
The parts draw minimal supply current (900μA per amplifier) while meeting excellent DC accuracy, AC performance, noise and output drive specifications. The ISL28148 features an enable pin that can be used to turn the device off and reduce the supply current to a maximum of 16μA. Operation is guaranteed across the -40°C to +125°C temperature range.
Specifikationer
Attribute | Value |
|---|---|
| Amplifier Type | Precision |
| Mounting Type | Surface Mount |
| Package Type | SOT-23 |
| Power Supply Type | Dual, Single |
| Number of Channels per Chip | 1 |
| Pin Count | 6 |
| Typical Single Supply Voltage | 2.4 → 5.5 V |
| Typical Gain Bandwidth Product | 4.5MHz |
| Output Type | Rail to Rail |
| Typical Dual Supply Voltage | ±1.2 to ±2.75V |
| Typical Slew Rate | ±4V/µs |
| Maximum Operating Temperature | +125 °C |
| Minimum Operating Temperature | -40 °C |
| Maximum Input Voltage | 5.75 V |
| Output Current | 68 mA |
| Offset Voltage | ±2.8mV |
| Typical Voltage Gain | 280 V/mV |
| Rail to Rail | Rail to Rail Input/Output |
| Height | 1.14mm |
| Dimensions | 2.9 x 1.6 x 1.14mm |
| Length | 2.9mm |
| Typical Input Voltage Noise Density | 28nV/√Hz |
| Width | 1.6mm |