BNS300 Magnetic Safety Switch, Plastic, 24 V dc

  • RS-artikelnummer 623-3183
  • Tillv. art.nr BNS 300-01ZG-2M
  • Tillverkare / varumärke Schmersal
Datablad
Lagstiftning och ursprungsland
RoHS-Försäkran
COO (Country of Origin): DE
Produktdetaljer

BNS 300, Coded, Integral Evaluation

Control category 1 to EN954-1
Output function indicated at rear of switch by LED
Ideal for lower risk applications, integral evaluation means no additional safety module is required
IP67 protection
Suitable for food processing industry

Note

The actuating magnet is not included with the sensor and must be ordered separately.

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS30 with integral evaluation) and magnet (BPS) is used

Standards

IEC/EN60947-5-3, BG-GS-ET-14, EN1088

Approvals

BG, UL, CSA

Caution

EN60947-5-3 standard is only met if entire system consisting of safety sensor (BNS30 with integral evaluation) and magnet (BPS) is used

Specifikationer
Attribute Value
Supply Voltage 24 V dc
Housing Material Plastic
Terminal Type Cable
Series BNS300
IP Rating IP67
Actuator Included No
Sensor Principle Magnetic
Length 78mm
Housing Colour Black
Dimensions 30 (Dia.) x 78 mm
Actuator Type Coded
Width 30 (Dia.)mm
Safety Category 4
18 I lager för leverans inom 1 arbetsdagar
Pris (ex. moms) Each
1 067,28 kr
(exkl. moms)
1 334,10 kr
(inkl. moms)
Enheter
Per unit
1 +
1 067,28 kr
Related Products
The SensaGuard Non-Contact Switch is PLe, SIL 3 ...
Description:
The SensaGuard Non-Contact Switch is PLe, SIL 3 and Cat 4 rated and is intended for use with sliding, hinge or lift-off machine guard doors. These safety switches are based on RFID (Radio Frequency IDentification) technology for coding and inductive ...
With no need for a separate safety relay ...
Description:
With no need for a separate safety relay this device saves space in the cabinet with no loss of functionality and is easy to install. provides Cat 3//4 or SIL 2//3 protection on moveable machine guards or where frequent washdown ...
The HYGIECODE MMC-H safety switch has been developed ...
Description:
The HYGIECODE MMC-H safety switch has been developed for non-contact interlocking of hinged, sliding or removable guard doors.It is ideal for applications that require a wide tolerance to misalignment, high switching capacity or high level of hygiene.When used with a ...
the Str1 transponder safety switch has monitored semiconductor ...
Description:
the Str1 transponder safety switch has monitored semiconductor outputs (oSSds) and can be safely connected either individually or in series. It can be used for applications where a high level of manipulation protection is required. the Str1 is available with ...