Aim-TTi 1908P Bench Digital Multimeter, True RMS, 10A ac Max, 10A dc Max, 1000V ac Max - UKAS Calibrated

Se alla Multimeters

Antal (1 enhet)*

9 839,50 kr

(exkl. moms)

12 299,38 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • 3 enhet(er) levereras från den 30 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +9 839,50 kr

*vägledande pris

RS-artikelnummer:
123-8863
Tillv. art.nr:
1908P
Tillverkare / varumärke:
Aim-TTi
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Aim-TTi

Multimeter Type

Bench

Display Type

Digital

Model Number p

1908P

Calibrated

UKAS

Functions Measured

AC Current, AC Voltage, Capacitance, DC Current, DC Voltage, Frequency, Resistance, Temperature

Absolute Maximum AC Voltage Measurement

1000V ac

Absolute Maximum DC Voltage Measurement

1000V dc

Absolute Maximum AC Current Measurement

10A ac

Absolute Maximum Resistance Measurement

1kΩ

Absolute Maximum DC Current Measurement

10A dc

True RMS

Yes

Absolute Maximum Capacitance Measurement

100µF

Absolute Maximum Temperature Measurement

+400°C

Maximum Frequency

100kHz

AC Current Measurement Resolution

100nA ac

DC Current Measurement Resolution

100nA dc

AC Voltage Measurement Resolution

1µV ac

Resistance Measurement Resolution

1mΩ

DC Voltage Measurement Resolution

1µV dc

Temperature Measurement Resolution

0.1°C

Capacitance Measurement Resolution

10pF

Safety Category Level

CAT II

Height

88mm

Weight

2kg

Safety Category Voltage

600V

Best Resistance Measurement Accuracy

0.05 %

Minimum Operating Temperature

+5°C

Best DC Current Accuracy

0.05 %

Maximum Operating Temperature

+40°C

Battery Type

Rechargeable NiMH

Width

235mm

Best DC Voltage Accuracy

0.02 %

Dimensions

260 x 235 x 88mm

Best AC Current Accuracy

0.35 %

Best Capacitance Measurement Accuracy

2 %

Best AC Voltage Accuracy

0.3 %

Length

260mm

Best Temperature Measurement Accuracy

0.05 %

COO (Country of Origin):
GB

Aim-TTI 1908P Series Dual Measurement Bench Multimeter


Aim-TTi 1908 Series is a dual measurement, dual display bench-top/portable multimeter. It features continuity and diode test, automatic or manual ranging, linear scaling with offset, dB measurements, limits comparison, percentage deviation (%), min-max storage, power measurement in watts or VA, automatic data logging and external triggering. The logger function can store up to 500 readings from the main display in non-volatile memory. The two displays can be used to display a measurement along with the selected range (e.g. 100 Vdc), a measurement in two different units (e.g. AC volts and dBm), the result of a calculated function (e.g. value and % deviation), two parameters of one signal (e.g. AC and DC volts) or two different signals (e.g. AC volts and DC current). Software 1908-PC Link provides remote control of main functions and logging function with graphical and tabular displays (logged data can be exported to a CSV file). Model 1908P can be remotely controlled via its RS232, USB or LAN interface. Model 1908 (non ’P’) can only be controlled via USB.

For an optional GPIB module see stock number 144-5481.

Features and Benefits


Affordable 5.5 digit high performance bench/portable multimeter, 120 000 counts

Dual display (main display and secondary display) and dual measurement capability

Mains power or Internal rechargeable batteries for true portability

High accuracy and resolution 0.02%, 1 μV, 0.1 μA, 1 mΩ

Manual or Auto-ranging

True RMS AC and AC+DC measurement

DC and AC volts, DC and AC current, resistance, capacitance, frequency, and temperature measurement

Measurement post-processing

Continuity and diode checks

Two or four wire selectable ohms measurement

Display nulling and ohms null

Selectable measurement speed

Touch hold mode - holds onto a stable reading until updated

500 point data logger with timer

Temperature measurement for PT100 or PT1000 sensors

Wide range of computing functions e.g. Ax + B

External input/output remote triggering

Closed case calibration

USB interface standard (1908 & 1908P) plus RS232, LAN/LXI

Kensington security slot incorporated

Dimensions 250 x 97 x 295 mm

Weight 3.2 kg

Note

In dual measurement mode a completely independent but complementary measurement can be made and displayed on the secondary display. The two independent measurements are made alternately, not simultaneously, and the display update rate for each measurement is consequently reduced (this is not the same as dual display mode, where both a measurement and a modified version of that measurement are displayed e.g. ac Volts and the dB equivalent).

Standards

EN61010-1, EN61010-2-030 & EN61010-2-033, EN61326-1 EMC

Supplied with

IVI driver, LV/CVI driver, USB driver

relaterade länkar