Electromen OY DC Motor Controller, 10 → 35 V, 15 A, 35 V

Se alla Motor Controllers

Antal (1 enhet)*

1 487,80 kr

(exkl. moms)

1 859,75 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 1 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +1 487,80 kr

*vägledande pris

RS-artikelnummer:
183-7338
Tillv. art.nr:
EM-241-SPF
Tillverkare / varumärke:
Electromen OY
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Electromen OY

Supply Voltage

10 → 35 V

Current Rating

15 A

Voltage Rating

35 V

COO (Country of Origin):
FI

Electromen - EM-241SPF DC MOTOR POSITIONING CONTROLLER, 12-24 V, 15A


EM-241-SPF is a positioning driver to be used with DC-motors, the solid state power stage operates with high efficiency using FET-transistors.Feedback can be achieved with a one or two line pulse signal, although it is preferable and more accurate to do so with two 0°/90° pulse lines.

The driver includes an analogue control with 3 signal ranges, 0-5V, 0-11V or 4-20mA, the input is freely scalable within this range.

The maximum accuracy available for positioning is 0.2%, exceeding what is generally required for most actuator positioning applications.

The learn routine feature helps determine the full movement range quickly and easily and the range of be modified from both ends with limit switch parameters.

Current limits and driving speeds can be set individually for both directions.

Driver includes also many other dynamic adjustment options including: load compensation, dead-zone setting (positioning window), start and stop ramps for a smooth direction change and an adjustable braking zone.

The on-board LED-light indicates the possible fault situations, the fault signal can be forwarded through the combiport for external use

Combiport can also be set to give 'position OK' output or re-transmit current position via analogue voltage output

The drive has very low RF emissions and is suitable for use in in critical electromagnetic environments including medical

For parameters setting there is 3 options: EM-236 interface unit, EM-268 with Menthol-Lite PC-program and EM-326 with Menthol-App application for smartphone

Features and Benefits


12-24V dc, 15A continuous, 30A peak

Set value 0-5V, 0-11V, 0-20mA & feedback input from encoder/hall sensor

Positioning accuracy max. 0.2%

Speed, direction, current limiting, soft start/stop and range adjustment control

Compact and DIN rail mountable;Quadrature pulse counting

Multiple dynamic settings

Solid state power stage

One or two pulse feedback

Voltage or current control (4-20mA) control

Position accuracy max. 0.2%

Flexible set up options

* 15A continuous @ 2kHz PWM, 30A momentary (Ta<50°C)

relaterade länkar