DiodesZetex Surface Mount Hall Effect Sensor 1.6 V, 4-Pin
- RS-artikelnummer:
- 921-0326P
- Tillv. art.nr:
- AH1898-CA4-7
- Tillverkare / varumärke:
- DiodesZetex
Mängdrabatt möjlig
Antal 200 enheter (levereras i en rulle)*
488,40 kr
(exkl. moms)
610,40 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 01 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 200 - 480 | 2,442 kr |
| 500 - 980 | 2,375 kr |
| 1000 - 1980 | 2,313 kr |
| 2000 + | 2,263 kr |
*vägledande pris
- RS-artikelnummer:
- 921-0326P
- Tillv. art.nr:
- AH1898-CA4-7
- Tillverkare / varumärke:
- DiodesZetex
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | DiodesZetex | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Mount Type | Surface Mount | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 1.6V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Pin Count | 4 | |
| Length | 0.82mm | |
| Width | 0.82 mm | |
| Height | 0.36mm | |
| Välj alla | ||
|---|---|---|
Brand DiodesZetex | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Mount Type Surface Mount | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 1.6V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Pin Count 4 | ||
Length 0.82mm | ||
Width 0.82 mm | ||
Height 0.36mm | ||
- COO (Country of Origin):
- CN
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three Basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.