Infineon Through Hole Hall Effect Sensor 2.7 V 18 V, SSOP, 3-Pin
- RS-artikelnummer:
- 753-3251P
- Tillv. art.nr:
- TLE4906LHALA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal 20 enheter (levereras i en påse)*
120,08 kr
(exkl. moms)
150,10 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 1 245 enhet(er) från den 22 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 20 - 95 | 6,004 kr |
| 100 - 495 | 5,51 kr |
| 500 - 995 | 4,592 kr |
| 1000 + | 4,256 kr |
*vägledande pris
- RS-artikelnummer:
- 753-3251P
- Tillv. art.nr:
- TLE4906LHALA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | Digital | |
| Mount Type | Through Hole | |
| Magnetic Type | Unipolar | |
| Maximum Frequency Response | 15.2kHz | |
| Minimum Frequency Response | 0kHz | |
| Minimum Supply Voltage | 2.7V | |
| Package Type | SSOP | |
| Maximum Supply Voltage | 18V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Series | TLE4906L | |
| Width | 1.52 mm | |
| Standards/Approvals | No | |
| Height | 3.29mm | |
| Length | 4.16mm | |
| Automotive Standard | No | |
| Supply Current | 2mA | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology Digital | ||
Mount Type Through Hole | ||
Magnetic Type Unipolar | ||
Maximum Frequency Response 15.2kHz | ||
Minimum Frequency Response 0kHz | ||
Minimum Supply Voltage 2.7V | ||
Package Type SSOP | ||
Maximum Supply Voltage 18V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Series TLE4906L | ||
Width 1.52 mm | ||
Standards/Approvals No | ||
Height 3.29mm | ||
Length 4.16mm | ||
Automotive Standard No | ||
Supply Current 2mA | ||
Hall Effect Switches, Infineon
A range of Hall Effect switching ICs from Infineon available with both standard and latching operation.
Hall Effect Sensors, Infineon
A range of integrated circuits from Infineon utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.