Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- RS-artikelnummer:
- 724-4676P
- Tillv. art.nr:
- A1220LUA-T
- Tillverkare / varumärke:
- Allegro Microsystems
Mängdrabatt möjlig
Antal 25 enheter (levereras i en påse)*
235,20 kr
(exkl. moms)
294,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 1 680 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 25 - 95 | 9,408 kr |
| 100 - 245 | 7,772 kr |
| 250 - 495 | 6,90 kr |
| 500 + | 6,764 kr |
*vägledande pris
- RS-artikelnummer:
- 724-4676P
- Tillv. art.nr:
- A1220LUA-T
- Tillverkare / varumärke:
- Allegro Microsystems
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Chopper Stabilised BiCMOS | |
| Mount Type | Through Hole | |
| Magnetic Type | Bipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Package Type | SIP | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Standards/Approvals | Lead (Pb) Free | |
| Width | 1.52 mm | |
| Height | 3.02mm | |
| Length | 4.09mm | |
| Series | A122 | |
| Automotive Standard | AEC-Q100 | |
| Response Time | 25μs | |
| Supply Current | 4mA | |
| Välj alla | ||
|---|---|---|
Brand Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Chopper Stabilised BiCMOS | ||
Mount Type Through Hole | ||
Magnetic Type Bipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Package Type SIP | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Standards/Approvals Lead (Pb) Free | ||
Width 1.52 mm | ||
Height 3.02mm | ||
Length 4.09mm | ||
Series A122 | ||
Automotive Standard AEC-Q100 | ||
Response Time 25μs | ||
Supply Current 4mA | ||
A1220/1/2/3 Chopper Stabilised Hall Effect Latches, Allegro Microsystems
The Allegro Microsystems A1220, A1221, A1222, and A1223 Hall-effect Latches include a voltage regulator, Hall voltage generator, small-signal amplifier, chopper stabilisation and Schmitt trigger. They are also short circuit protected open-drain output to sink up to 25 mA.
A south pole turns on the output and a north pole turns off the output.
The voltage regulator permits operation with supply voltages of 3 V to 24 V.
Available in two package styles; 3-pin SOT23W for surface-mounting and a three-pin ultra-mini SIP for through-hole mounting.
AEC-Q100 automotive qualified
Symmetrical latch switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply down to 3 V
Reverse battery protection