Allegro Microsystems Through Hole Hall Effect Sensor 3 V 24 V, SIP, 3-Pin
- RS-artikelnummer:
- 724-4660P
- Tillv. art.nr:
- A1120LUA-T
- Tillverkare / varumärke:
- Allegro Microsystems
Mängdrabatt möjlig
Antal 25 enheter (levereras i en påse)*
206,10 kr
(exkl. moms)
257,625 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 2 435 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 25 - 95 | 8,244 kr |
| 100 - 245 | 7,37 kr |
| 250 - 495 | 7,168 kr |
| 500 + | 6,988 kr |
*vägledande pris
- RS-artikelnummer:
- 724-4660P
- Tillv. art.nr:
- A1120LUA-T
- Tillverkare / varumärke:
- Allegro Microsystems
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Chopper Stabilised Precision Hall Effect | |
| Mount Type | Through Hole | |
| Magnetic Type | Unipolar | |
| Maximum Frequency Response | 800kHz | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 24V | |
| Package Type | SIP | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 150°C | |
| Pin Count | 3 | |
| Series | A1120 | |
| Width | 1.52 mm | |
| Standards/Approvals | 100% matte tin plated, Pb-Free | |
| Length | 4.09mm | |
| Height | 3.02mm | |
| Response Time | 25μs | |
| Supply Current | 4mA | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Chopper Stabilised Precision Hall Effect | ||
Mount Type Through Hole | ||
Magnetic Type Unipolar | ||
Maximum Frequency Response 800kHz | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 24V | ||
Package Type SIP | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 150°C | ||
Pin Count 3 | ||
Series A1120 | ||
Width 1.52 mm | ||
Standards/Approvals 100% matte tin plated, Pb-Free | ||
Length 4.09mm | ||
Height 3.02mm | ||
Response Time 25μs | ||
Supply Current 4mA | ||
Automotive Standard AEC-Q100 | ||
A1120/1/2/3/5 Chopper Stabilised Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1120, A1121, A1122, A1123, and A1125 Hall-effect, unipolar switches are temperature-stable and stress-resistant sensor ICs. High temperature performance is MADE possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over-molding, temperature dependencies, and thermal stress.
They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output to sink up to 25 mA. The voltage regulator enables supply voltages of 3 V to 24 V.
For the A1120, A1121, A1122, and A1123, a south pole turns on the output and removal turns off the output. For the A1125, it is reversed and the south pole turns off the A1125 output.
Unipolar switchpoints
Resistant to physical stress
Superior temperature stability
Output short circuit protection
Operation from unregulated supply