DiodesZetex Through Hole Hall Effect Latch Sensor 3.5 V 20 V, SIP-3, 3-Pin
- RS-artikelnummer:
- 712-2841P
- Tillv. art.nr:
- AH1751-PG-A-A
- Tillverkare / varumärke:
- DiodesZetex
Antal 10 enheter (levereras som en tejp)*
37,70 kr
(exkl. moms)
47,10 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 3 510 enhet(er) från den 22 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 10 + | 3,77 kr |
*vägledande pris
- RS-artikelnummer:
- 712-2841P
- Tillv. art.nr:
- AH1751-PG-A-A
- Tillverkare / varumärke:
- DiodesZetex
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | DiodesZetex | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Latch Sensor | |
| Technology | Hall Effect | |
| Mount Type | Through Hole | |
| Minimum Supply Voltage | 3.5V | |
| Package Type | SIP-3 | |
| Maximum Supply Voltage | 20V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 3 | |
| Width | 1.6 mm | |
| Standards/Approvals | RoHS | |
| Height | 3.2mm | |
| Series | AH1751 | |
| Length | 4.3mm | |
| Supply Current | 6mA | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand DiodesZetex | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Latch Sensor | ||
Technology Hall Effect | ||
Mount Type Through Hole | ||
Minimum Supply Voltage 3.5V | ||
Package Type SIP-3 | ||
Maximum Supply Voltage 20V | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 3 | ||
Width 1.6 mm | ||
Standards/Approvals RoHS | ||
Height 3.2mm | ||
Series AH1751 | ||
Length 4.3mm | ||
Supply Current 6mA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
Hall Effect Switches & Latches, Diodes Inc
Hall Effect Sensors, Diodes Inc
A range of sensor ICs from Diodes Inc utilizing the Hall Effect to implement non-contact switching and sensing functions. Hall Effect ICs fall into three Basic categories: Linear Sensors, Switches, and Latches. Linear Sensors have a linear analogue output proportional to magnetic field strength whilst Hall Effect Switches and Latches have a switching output and are activated by magnetic field proximity. Latching switches require a magnetic field of opposite polarity to respectively activate and deactivate the switched output. Hall Effect switches are also available with 2-wire current level operation.