Honeywell Surface Hall Effect Sensor 1.65 V 5.5 V, Push Pull, SOT-23, 3-Pin
- RS-artikelnummer:
- 236-2720P
- Tillv. art.nr:
- SM351LT
- Tillverkare / varumärke:
- Honeywell
Mängdrabatt möjlig
Antal 50 enheter (levereras på en kontinuerlig remsa)*
617,10 kr
(exkl. moms)
771,40 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 9 245 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 50 - 95 | 12,342 kr |
| 100 - 245 | 12,028 kr |
| 250 - 995 | 11,716 kr |
| 1000 + | 11,424 kr |
*vägledande pris
- RS-artikelnummer:
- 236-2720P
- Tillv. art.nr:
- SM351LT
- Tillverkare / varumärke:
- Honeywell
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Honeywell | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Position Sensor | |
| Technology | Magneto Resistive | |
| Mount Type | Surface | |
| Interface Type | Push Pull | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 1.65V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | RoHS (Directive 2002/95/EC), ESD Class 2 | |
| Series | Nanopower | |
| Response Time | 15μs | |
| Supply Current | 1mA | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Honeywell | ||
Product Type Hall Effect Sensor | ||
Sensor Type Position Sensor | ||
Technology Magneto Resistive | ||
Mount Type Surface | ||
Interface Type Push Pull | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 1.65V | ||
Maximum Supply Voltage 5.5V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals RoHS (Directive 2002/95/EC), ESD Class 2 | ||
Series Nanopower | ||
Response Time 15μs | ||
Supply Current 1mA | ||
Automotive Standard No | ||
- COO (Country of Origin):
- CN
The Honeywell Nanopower series magneto resistive (MR) sensor ICs are ultra-sensitive device designed to accommodate a wide range of applications with large air gaps, small magnetic field and low power requirements. The sensor ICs respond to either a north or south pole applied in a direction parallel to the sensor. They do not require the magnet polarity to be identified, simplifying installation and potentially reducing system cost. The sensor ICs use a very low average current consumption and a push-pull output which does not require a pull-up resistor. The sensor ICs can operate from a supply voltage as low as 1.65 V, promoting energy efficiency.
Temperature range -40 °C to 85 °C
Non-chopper stabilized design
High sensitivity