Infineon Surface Hall Effect Sensor Latch 3 V 32 V, Open Drain Output, SOT-23, 3-Pin
- RS-artikelnummer:
- 223-8583
- Tillv. art.nr:
- TLE49644MXTMA1
- Tillverkare / varumärke:
- Infineon
Antal (1 rulle med 10000 enheter)*
25 470,00 kr
(exkl. moms)
31 840,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 04 maj 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 10000 + | 2,547 kr | 25 470,00 kr |
*vägledande pris
- RS-artikelnummer:
- 223-8583
- Tillv. art.nr:
- TLE49644MXTMA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor Latch | |
| Sensor Type | Hall Effect | |
| Mount Type | Surface | |
| Interface Type | Open Drain Output | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 32V | |
| Package Type | SOT-23 | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 10mT | |
| Maximum Operating Temperature | 170°C | |
| Pin Count | 3 | |
| Width | 1.3 mm | |
| Length | 2.9mm | |
| Series | TLE49644 | |
| Height | 1mm | |
| Standards/Approvals | RoHS | |
| Supply Current | 1.6mA | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor Latch | ||
Sensor Type Hall Effect | ||
Mount Type Surface | ||
Interface Type Open Drain Output | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 32V | ||
Package Type SOT-23 | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 10mT | ||
Maximum Operating Temperature 170°C | ||
Pin Count 3 | ||
Width 1.3 mm | ||
Length 2.9mm | ||
Series TLE49644 | ||
Height 1mm | ||
Standards/Approvals RoHS | ||
Supply Current 1.6mA | ||
Automotive Standard AEC-Q100 | ||
The Infineon XENSIV 3M hall effect switch dedicated for position detection applications. This device is an integrated hall effect switch designed specifically for highly accurate applications with superior supply voltage capability, operating temperature range and temperature stability of the magnetic thresholds.
Operation from unregulated power supply
Reverse polarity protection
Overvoltage capability up to 42 V without external resistor
Output overcurrent & over temperature protection
Active error compensation
High stability of magnetic thresholds
relaterade länkar
- Infineon Surface Hall Effect Sensor Latch 3 V 32 V SOT-23, 3-Pin
- Infineon Surface Hall Effect Sensor Latch 3 V 26 V 3-Pin
- Infineon Surface Hall Effect Sensor 3 V 32 V SOT-23, 3-Pin
- Infineon Through Hole Hall Effect Sensor 32 V
- DiodesZetex Hall Effect Switch 4mA Solder -40 → 150°C, 3 → 28 V
- DiodesZetex Hall Effect Switch 4mA 60mA Solder -40 → 150°C, 3 → 28 V
- DiodesZetex Hall Effect Switch 4mA 55mA Solder -40 → 150°C, 3 → 28 V
- Infineon Through Hole Hall Effect Sensor 32 V 32V
