Infineon Surface Hall Effect Sensor Latch 3 V 32 V, Open Drain Output, SOT-23, 3-Pin
- RS-artikelnummer:
- 223-8582P
- Tillv. art.nr:
- TLE49643MXTSA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal 40 enheter (levereras på en kontinuerlig remsa)*
208,76 kr
(exkl. moms)
260,96 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 1 720 enhet(er) från den 16 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 40 - 80 | 5,219 kr |
| 100 - 220 | 4,811 kr |
| 240 - 480 | 4,469 kr |
| 500 + | 4,351 kr |
*vägledande pris
- RS-artikelnummer:
- 223-8582P
- Tillv. art.nr:
- TLE49643MXTSA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Sensor Type | Hall Effect | |
| Product Type | Hall Effect Sensor Latch | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Interface Type | Open Drain Output | |
| Minimum Supply Voltage | 3V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 32V | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 12.5mT | |
| Maximum Operating Temperature | 170°C | |
| Pin Count | 3 | |
| Width | 1.3 mm | |
| Length | 2.9mm | |
| Series | TLE49643 | |
| Height | 1mm | |
| Standards/Approvals | RoHS | |
| Supply Current | 1.6mA | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Sensor Type Hall Effect | ||
Product Type Hall Effect Sensor Latch | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Interface Type Open Drain Output | ||
Minimum Supply Voltage 3V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 32V | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 12.5mT | ||
Maximum Operating Temperature 170°C | ||
Pin Count 3 | ||
Width 1.3 mm | ||
Length 2.9mm | ||
Series TLE49643 | ||
Height 1mm | ||
Standards/Approvals RoHS | ||
Supply Current 1.6mA | ||
Automotive Standard AEC-Q100 | ||
The Infineon XENSIV 3M hall effect switch dedicated for position detection applications. This device is an integrated hall effect switch designed specifically for highly accurate applications with superior supply voltage capability, operating temperature range and temperature stability of the magnetic thresholds.
Operation from unregulated power supply
Reverse polarity protection
Overvoltage capability up to 42 V without external resistor
Output overcurrent & over temperature protection
Active error compensation
High stability of magnetic thresholds