Infineon Surface Hall Effect Sensor Latch 3 V 32 V, Open Drain Output, SOT-23, 3-Pin
- RS-artikelnummer:
- 223-8581
- Tillv. art.nr:
- TLE49643MXTSA1
- Tillverkare / varumärke:
- Infineon
Antal (1 rulle med 3000 enheter)*
6 198,00 kr
(exkl. moms)
7 746,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 04 maj 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 3000 + | 2,066 kr | 6 198,00 kr |
*vägledande pris
- RS-artikelnummer:
- 223-8581
- Tillv. art.nr:
- TLE49643MXTSA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor Latch | |
| Sensor Type | Hall Effect | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Interface Type | Open Drain Output | |
| Minimum Supply Voltage | 3V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 32V | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 12.5mT | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 170°C | |
| Height | 1mm | |
| Series | TLE49643 | |
| Standards/Approvals | RoHS | |
| Width | 1.3 mm | |
| Length | 2.9mm | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 1.6mA | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor Latch | ||
Sensor Type Hall Effect | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Interface Type Open Drain Output | ||
Minimum Supply Voltage 3V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 32V | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 12.5mT | ||
Pin Count 3 | ||
Maximum Operating Temperature 170°C | ||
Height 1mm | ||
Series TLE49643 | ||
Standards/Approvals RoHS | ||
Width 1.3 mm | ||
Length 2.9mm | ||
Automotive Standard AEC-Q100 | ||
Supply Current 1.6mA | ||
The Infineon XENSIV 3M hall effect switch dedicated for position detection applications. This device is an integrated hall effect switch designed specifically for highly accurate applications with superior supply voltage capability, operating temperature range and temperature stability of the magnetic thresholds.
Operation from unregulated power supply
Reverse polarity protection
Overvoltage capability up to 42 V without external resistor
Output overcurrent & over temperature protection
Active error compensation
High stability of magnetic thresholds
relaterade länkar
- Infineon Surface Hall Effect Sensor Latch 3 V 32 V SOT-23, 3-Pin
- Infineon Surface Hall Effect Sensor Latch 3 V 26 V 3-Pin
- Infineon Surface Hall Effect Sensor 3 V 32 V SOT-23, 3-Pin
- Infineon Through Hole Hall Effect Sensor 32 V
- DiodesZetex Hall Effect Switch 4mA Solder -40 → 150°C, 3 → 28 V
- DiodesZetex Hall Effect Switch 4mA 60mA Solder -40 → 150°C, 3 → 28 V
- DiodesZetex Hall Effect Switch 4mA 55mA Solder -40 → 150°C, 3 → 28 V
- Infineon Through Hole Hall Effect Sensor 32 V 32V
