Melexis Surface Hall Effect Sensor 1.6 V 3.6 V, UTQFN, 6-Pin
- RS-artikelnummer:
- 194-2954
- Tillv. art.nr:
- MLX92213ELD-AAA-000-RE
- Tillverkare / varumärke:
- Melexis
Mängdrabatt möjlig
Antal (1 förpackning med 25 enheter)*
98,675 kr
(exkl. moms)
123,35 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 30 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 25 - 25 | 3,947 kr | 98,68 kr |
| 50 - 475 | 3,409 kr | 85,23 kr |
| 500 - 975 | 3,324 kr | 83,10 kr |
| 1000 - 2475 | 3,244 kr | 81,10 kr |
| 2500 + | 3,154 kr | 78,85 kr |
*vägledande pris
- RS-artikelnummer:
- 194-2954
- Tillv. art.nr:
- MLX92213ELD-AAA-000-RE
- Tillverkare / varumärke:
- Melexis
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Melexis | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | CMOS | |
| Mount Type | Surface | |
| Magnetic Type | Latch | |
| Minimum Supply Voltage | 1.6V | |
| Maximum Supply Voltage | 3.6V | |
| Package Type | UTQFN | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 85°C | |
| Width | 2 mm | |
| Length | 1.5mm | |
| Series | MLX92213 | |
| Height | 0.35mm | |
| Standards/Approvals | Pb Free | |
| Automotive Standard | No | |
| Response Time | 1.90ms | |
| Välj alla | ||
|---|---|---|
Brand Melexis | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology CMOS | ||
Mount Type Surface | ||
Magnetic Type Latch | ||
Minimum Supply Voltage 1.6V | ||
Maximum Supply Voltage 3.6V | ||
Package Type UTQFN | ||
Minimum Operating Temperature -40°C | ||
Pin Count 6 | ||
Maximum Operating Temperature 85°C | ||
Width 2 mm | ||
Length 1.5mm | ||
Series MLX92213 | ||
Height 0.35mm | ||
Standards/Approvals Pb Free | ||
Automotive Standard No | ||
Response Time 1.90ms | ||
The MLX92213 features an ultra-sensitive Hall-effect latch operating from 1.6 V to 3.6 V. The output is a Push-Pull type so that an external pull-up resistor is not needed for proper operation, hence reducing PCB component count.
his device is primarily targeting battery-operated applications. As the famous Hall-effect omnipolar switch MLX90248, the MLX92213 employs an awake/sleep strategy to reduce its power consumption versus a standard Hall-effect latch sensor.
The magnetic flux density is periodically evaluated against predefined thresholds. If the flux density is above/below the BOP/BRP thresholds, then the output changes its state accordingly. During the sleep mode the output is latched in its previous state. The design has been optimized for applications requiring extended operating lifetime in battery-powered systems.
relaterade länkar
- Melexis Surface Mount Hall Effect Sensor 6-Pin
- Melexis Surface Mount Hall Effect Sensor 23-Pin
- Melexis Surface Mount Hall Effect Sensor 3-Pin
- Melexis Through Hole Hall Effect Sensor 3-Pin
- Melexis 3-Axis Surface Mount Hall Effect Sensor SPI
- Melexis Through Hole Hall Effect Sensor
- Melexis Surface Mount Position Sensor 8-Pin
- Melexis 3-Axis Surface Mount Position Sensor, Digital PWM