Murata 3-Axis Surface Sensor 3 V 3.6 V, SPI, DFL, 12-Pin
- RS-artikelnummer:
- 144-6539
- Tillv. art.nr:
- SCA3300-D01-1
- Tillverkare / varumärke:
- Murata
Mängdrabatt möjlig
Antal (1 rulle med 100 enheter)*
28 979,40 kr
(exkl. moms)
36 224,20 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 06 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 100 - 100 | 289,794 kr | 28 979,40 kr |
| 200 + | 285,98 kr | 28 598,00 kr |
*vägledande pris
- RS-artikelnummer:
- 144-6539
- Tillv. art.nr:
- SCA3300-D01-1
- Tillverkare / varumärke:
- Murata
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Murata | |
| Sensor Type | Accelerometer | |
| Product Type | Sensor | |
| Number of Axis | 3 | |
| Technology | Capacitive 3D MEMS | |
| Mount Type | Surface | |
| Interface Type | SPI | |
| Maximum Frequency Response | 88Hz | |
| Minimum Frequency Response | 10Hz | |
| Minimum Supply Voltage | 3V | |
| Maximum Supply Voltage | 3.6V | |
| Package Type | DFL | |
| Minimum Operating Temperature | -40°C | |
| Sensitivity | 5400LSB/g | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 12 | |
| Standards/Approvals | No | |
| Length | 8.6mm | |
| Height | 3.3mm | |
| Width | 7 mm | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Murata | ||
Sensor Type Accelerometer | ||
Product Type Sensor | ||
Number of Axis 3 | ||
Technology Capacitive 3D MEMS | ||
Mount Type Surface | ||
Interface Type SPI | ||
Maximum Frequency Response 88Hz | ||
Minimum Frequency Response 10Hz | ||
Minimum Supply Voltage 3V | ||
Maximum Supply Voltage 3.6V | ||
Package Type DFL | ||
Minimum Operating Temperature -40°C | ||
Sensitivity 5400LSB/g | ||
Maximum Operating Temperature 125°C | ||
Pin Count 12 | ||
Standards/Approvals No | ||
Length 8.6mm | ||
Height 3.3mm | ||
Width 7 mm | ||
Automotive Standard No | ||
- COO (Country of Origin):
- FI
Accelerometer ICs, Murata
Murata's low-g acceleration sensors include high performance digital and analog accelerometers for both safety critical automotive and industrial applications. Based on 3D MEMS technology and intended for horizontal or vertical measurements. The sensing element and the measuring ASIC are assembled in a dual-in-line or dual-in-flat-line plastic package with pins for surface mount and re-flow soldering.
The zero point temperature dependence is less than 1mg/°C. Environmentally protected with silicone gel for high reliability in a humid environment and during temperature cycling. The sensing element design with over damped frequency response enables excellent performance even in harsh and vibrating environments.
The measuring direction is parallel or perpendicular to the mounting plane. The ASIC includes an on-chip EEPROM memory with the calibration coefficients for unit interchangeability.
Murata accelerometers include failure detection: digitally activated self-test, calibration memory parity or check sum check and continuous connection failure detection.
Accelerometers, Murata
relaterade länkar
- Murata 3-Axis Surface Sensor 3 V 3.6 V DFL, 12-Pin
- Murata 3-Axis Surface Inclinometer 3 V 3.6 V Surface Mount, 12-Pin
- Murata 3-Axis Surface Sensor 3 V 3.6 V 24-Pin
- Murata 3-Axis Surface Accelerometer & Gyroscope 3 V 3.6 V SOIC, 32-Pin
- Murata 1-Axis Surface Inclinometer 3 V 3.6 V Surface Mount, 12-Pin
- Murata 3-Axis Surface High Performance Accelerometer 3 V 3.6 V Surface Mount, 12-Pin
- STMicroelectronics 3-Axis Surface Sensor 1.9 V 3.6 V VFLGA, 12-Pin
- STMicroelectronics 3-Axis Surface Sensor 1.71 V 3.6 V LGA, 12-Pin