Baumer GA240 Series Optical Absolute Encoder, Digital Signal, Solid Type, 10mm Shaft
- RS-artikelnummer:
- 150-243
- Tillv. art.nr:
- GA240.012W002000
- Tillverkare / varumärke:
- Baumer
Denna bild representerar endast produktgruppen
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
- RS-artikelnummer:
- 150-243
- Tillv. art.nr:
- GA240.012W002000
- Tillverkare / varumärke:
- Baumer
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Baumer | |
| Encoder Technology | Optical | |
| Series | GA240 | |
| Maximum Revolutions | 6000rpm | |
| Output Signal Type | Digital | |
| Shaft Type | Solid | |
| Shaft Diameter | 10mm | |
| Supply Voltage | 10 → 30 V dc | |
| Resolution | 13 bit | |
| IP Rating | IP54 | |
| Interface | Parallel-Binary | |
| Overall Width | 58mm | |
| Minimum Operating Temperature | -25°C | |
| Maximum Operating Temperature | +85°C | |
| Mounting Type | Clamping Flange | |
| Connection Type | Flange connector M23 | |
| Välj alla | ||
|---|---|---|
Brand Baumer | ||
Encoder Technology Optical | ||
Series GA240 | ||
Maximum Revolutions 6000rpm | ||
Output Signal Type Digital | ||
Shaft Type Solid | ||
Shaft Diameter 10mm | ||
Supply Voltage 10 → 30 V dc | ||
Resolution 13 bit | ||
IP Rating IP54 | ||
Interface Parallel-Binary | ||
Overall Width 58mm | ||
Minimum Operating Temperature -25°C | ||
Maximum Operating Temperature +85°C | ||
Mounting Type Clamping Flange | ||
Connection Type Flange connector M23 | ||
- COO (Country of Origin):
- DE
GA 240 series Ø 58 mm parallel output single-turn absolute encoders
13-bit resolution, 8192 steps per turn.
Totem pole output, NPN and PNP protected against short-circuits.
Electrical zero positioning.
Enable function to put encoder outputs in high impedance.
Totem pole output, NPN and PNP protected against short-circuits.
Electrical zero positioning.
Enable function to put encoder outputs in high impedance.
