onsemi MC14521BDG Monostable Multivibrator, Frequency Divider, 16-Pin SOIC
- RS-artikelnummer:
- 186-8851
- Tillv. art.nr:
- MC14521BDG
- Tillverkare / varumärke:
- onsemi
Mängdrabatt möjlig
Antal (1 rör med 48 enheter)*
216,624 kr
(exkl. moms)
270,768 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 09 mars 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rör* |
|---|---|---|
| 48 - 96 | 4,513 kr | 216,62 kr |
| 144 - 480 | 3,402 kr | 163,30 kr |
| 528 - 960 | 2,907 kr | 139,54 kr |
| 1008 - 2496 | 2,324 kr | 111,55 kr |
| 2544 + | 2,102 kr | 100,90 kr |
*vägledande pris
- RS-artikelnummer:
- 186-8851
- Tillv. art.nr:
- MC14521BDG
- Tillverkare / varumärke:
- onsemi
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | onsemi | |
| Logic Function | Frequency Divider | |
| Minimum Pulse Width | 120 ns | |
| Maximum Propagation Delay Time @ Maximum CL | 2600 ns @ 50 pF | |
| Maximum Quiescent Current | 150µA | |
| Mounting Type | Surface Mount | |
| Package Type | SOIC | |
| Pin Count | 16 | |
| Dimensions | 10 x 4 x 1.5mm | |
| Height | 1.5mm | |
| Length | 10mm | |
| Minimum Operating Supply Voltage | 3 V | |
| Minimum Operating Temperature | -55 °C | |
| Maximum Operating Temperature | +125 °C | |
| Propagation Delay Test Condition | 50pF | |
| Width | 4mm | |
| Automotive Standard | AEC-Q100 | |
| Maximum Operating Supply Voltage | 18 V | |
| Välj alla | ||
|---|---|---|
Brand onsemi | ||
Logic Function Frequency Divider | ||
Minimum Pulse Width 120 ns | ||
Maximum Propagation Delay Time @ Maximum CL 2600 ns @ 50 pF | ||
Maximum Quiescent Current 150µA | ||
Mounting Type Surface Mount | ||
Package Type SOIC | ||
Pin Count 16 | ||
Dimensions 10 x 4 x 1.5mm | ||
Height 1.5mm | ||
Length 10mm | ||
Minimum Operating Supply Voltage 3 V | ||
Minimum Operating Temperature -55 °C | ||
Maximum Operating Temperature +125 °C | ||
Propagation Delay Test Condition 50pF | ||
Width 4mm | ||
Automotive Standard AEC-Q100 | ||
Maximum Operating Supply Voltage 18 V | ||
The MC14521B consists of a chain of 24 flip-flops with an input circuit that allows three modes of operation. The input will function as a crystal oscillator, an RC oscillator, or as an input buffer for an external oscillator. Each flip-flop divides the frequency of the previous flip-flop by two, consequently this part will count up to 224 = 16,777,216. The count advances on the negative going edge of the clock. The outputs of the last seven-stages are available for added flexibility.
All Stages are Resettable
Reset Disables the RC Oscillator for Low Standby Power Drain
RC and Crystal Oscillator Outputs Are Capable of Driving External Loads
Test Mode to Reduce Test Time
VDD' and VSS' Pins Brought Out on Crystal Oscillator Inverter to Allow the Connection of External Resistors for Low-Power Operation
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load over the Rated Temperature Range.
Reset Disables the RC Oscillator for Low Standby Power Drain
RC and Crystal Oscillator Outputs Are Capable of Driving External Loads
Test Mode to Reduce Test Time
VDD' and VSS' Pins Brought Out on Crystal Oscillator Inverter to Allow the Connection of External Resistors for Low-Power Operation
Supply Voltage Range = 3.0 Vdc to 18 Vdc
Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load over the Rated Temperature Range.