Nexperia 74LVC1G123DP,125 Monostable Multivibrator 32mA, 8-Pin TSSOP

Se alla Monostable Multivibrators

Antal (1 rulle med 3000 enheter)*

12 363,00 kr

(exkl. moms)

15 453,00 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • 3 000 enhet(er) levereras från den 13 maj 2026
  • Dessutom levereras 3 000 enhet(er) från den 20 maj 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per rulle*
3000 +4,121 kr12 363,00 kr

*vägledande pris

RS-artikelnummer:
170-4890
Tillv. art.nr:
74LVC1G123DP,125
Tillverkare / varumärke:
Nexperia
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Nexperia

Logic Family

74LVC

Logic Function

Monostable Multivibrator

Number of Elements per Chip

1

Maximum High Level Output Current

-32mA

Maximum Low Level Output Current

32mA

Minimum Pulse Width

2.5 ns

Maximum Propagation Delay Time @ Maximum CL

20.3 ns @ 50 pF

Maximum Quiescent Current

20µA

Mounting Type

Surface Mount

Package Type

TSSOP

Pin Count

8

Dimensions

3.1 x 3.1 x 0.95mm

Height

0.95mm

Length

3.1mm

Propagation Delay Test Condition

50pF

Minimum Operating Supply Voltage

1.65 V

Minimum Operating Temperature

-40 °C

Maximum Operating Supply Voltage

5.5 V

Width

3.1mm

Maximum Operating Temperature

+125 °C

The 74LVC1G123 is a single retriggerable monostable multivibrator with Schmitt trigger inputs. Output pulse width is controlled by three methods. The basic pulse is programmed by selection of an external resistor (REXT) and capacitor (CEXT). Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (A) or the active HIGH-going edge input (B). By repeating this process, the output pulse period (Q = HIGH) can be made as long as desired. Alternatively an output delay can be terminated at any time by a LOW-going edge on input CLR, which also inhibits the triggering.

Wide supply voltage range
High noise immunity
CMOS low power consumption
DC triggered from active HIGH or active LOW inputs
Retriggerable for very long pulses up to 100 % duty factor
Direct reset terminates output pulse
Schmitt trigger on all inputs
Power-on-reset on outputs
Inputs accept voltages up to 5.5 V

relaterade länkar